Hi,
On 05-04-16 11:44, Ian Campbell wrote:
On Sat, 2016-04-02 at 21:10 +0200, Hans de Goede wrote:
DLDO3 is used to provide Port-D power and PD is used for the
usb-hub / sata-5v enable pins. The 2.5V comes from the schematic
and matches the factory image fex file.
Is the dts update being sync'd from the kernel?
Erm, no actually, the A83t USB support for the kernel is not entirely
ready, so we've some very minimal nodes in u-boot's a83t.dtsi for now,
which will get replaced with the real deal when we sync in the future.
The only thing u-boot cares about are controller base address and
the compatible string, and there is no discussion about those,
which is why I merged ChenYu's .dtsi patches with the minimal nodes,
this commit just enables these nodes in the M3 dts.
I do expect the eventual kernel m3.dts changes to be pretty much
identical.
If yes:
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Ian Campbell <[email protected]>
If you also want to mention the kernel sync in the commit message, you
can also retain the ack (of course).
Regards,
Hans
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
