Hi Lokesh,
On 4 April 2016 at 22:30, Lokesh Vutla <lokeshvu...@ti.com> wrote:
> This provides a way to load a FIT containing U-Boot and a selection of device
> tree files from a File system.
>
> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
> ---
> common/spl/spl_fit.c | 96
> ++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/spl.h | 5 +++
> 2 files changed, 101 insertions(+)
>
> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> index 1a5c027..4c9fe7b 100644
> --- a/common/spl/spl_fit.c
> +++ b/common/spl/spl_fit.c
> @@ -192,3 +192,99 @@ int spl_load_simple_fit(struct spl_load_info *info,
> ulong sector, void *fit)
>
> return 0;
> }
> +
> +int spl_fs_load_simple_fit(struct spl_load_info *info, const char *filename,
> void *fit)
> +{
> + ulong size, load;
> + unsigned long count;
> + int node, images;
> + void *load_ptr;
> + int fdt_offset, fdt_len;
> + int data_offset, data_size, file_offset;
> + int base_offset = 0, align_len;
> + void *dst;
> +
> + /*
> + * Figure out where the external images start. This is the base for
> the
> + * data-offset properties in each image.
> + */
> + size = fdt_totalsize(fit);
> + size = (size + 3) & ~3;
> + base_offset = (size + 3) & ~3;
Can you please refactor this to share code with spl_load_simple_fit()
where possible?
> +
> + /*
> + * Read the entire FIT header, placing it so it finishes before
> + * where we will load the image. Also the load address is aligned
> + * ARCH_DMA_MINALIGN.
> + */
> + align_len = ARCH_DMA_MINALIGN - 1;
> + fit = (void *)((CONFIG_SYS_TEXT_BASE - size - align_len) &
> ~align_len);
> + debug("FIT header read: destination = 0x%p, size = %lx \n", fit,
> size);
> + count = info->fs_read(info, filename, fit, 0, size);
> + if (count <= 0)
> + return -EIO;
> +
> + /* find the firmware image to load */
> + images = fdt_path_offset(fit, FIT_IMAGES_PATH);
> + if (images < 0) {
> + printf("%s: Cannot find /images node: %d\n", __func__,
> images);
> + return -1;
> + }
> + node = fdt_first_subnode(fit, images);
> + if (node < 0) {
> + printf("%s: Cannot find first image node: %d\n", __func__,
> node);
> + return -1;
> + }
> +
> + /* Get its information and set up the spl_image structure */
> + data_offset = fdt_getprop_u32(fit, node, "data-offset");
> + data_size = fdt_getprop_u32(fit, node, "data-size");
> + load = fdt_getprop_u32(fit, node, "load");
> + debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
> + spl_image.load_addr = load;
> + spl_image.entry_point = load;
> + spl_image.os = IH_OS_U_BOOT;
> +
> + /*
> + * Work out where to place the image. Assuming load addr of u-boot.bin
> + * is always aligned to ARCH_DMA_MINALIGN. It is possible that file
> + * offset is not aligned. In order to make sure that the file read is
> + * dma aligned, align the file offset to dma with extra bytes in the
> + * beginning. Then do a memcpy of image to dst.
> + */
> + data_offset += base_offset;
> + file_offset = data_offset & ~align_len;
> + load_ptr = (void *)load;
> + dst = load_ptr;
> +
> + /* Read the image */
> + debug("Temp u-boot.bin read from fit: dst = 0x%p, file offset = 0x%x,
> size = 0x%x\n",
> + dst, file_offset, data_size);
> + count = info->fs_read(info, filename, dst, file_offset, data_size);
> + if (count <= 0)
> + return -EIO;
> + debug("u-boot.bin load: dst = 0x%p, size = 0x%x\n", dst, data_size);
> + memcpy(dst, dst + (data_offset & align_len), data_size);
> +
> + /* Figure out which device tree the board wants to use */
> + fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset);
> + if (fdt_len < 0)
> + return fdt_len;
> +
> + /*
> + * Read the device tree and place it after the image. Making sure that
> + * load addr and file offset are aligned to dma.
> + */
> + dst = (void *)((load + data_size + align_len) & ~align_len);
> + fdt_offset += base_offset;
> + file_offset = fdt_offset & ~align_len;
> + debug("Temp fdt read from fit: dst = 0x%p, file offset = 0x%x, size =
> %d\n",
> + dst, file_offset, data_size);
> + count = info->fs_read(info, filename, dst, file_offset, data_size);
> + if (count <= 0)
> + return -EIO;
> + debug("fdt load: dst = 0x%p, size = 0x%x\n", load_ptr + data_size,
> data_size);
> + memcpy(load_ptr + data_size, dst + (fdt_offset & align_len),
> data_size);
> +
> + return 1;
> +}
> diff --git a/include/spl.h b/include/spl.h
> index de4f70a..276ca12 100644
> --- a/include/spl.h
> +++ b/include/spl.h
> @@ -36,6 +36,7 @@ struct spl_image_info {
> * @priv: Private data for the device
> * @bl_len: Block length for reading in bytes
> * @read: Function to call to read from the device
> + * @fd_read: Function to call to read from the a fs
> */
> struct spl_load_info {
> void *dev;
> @@ -43,9 +44,13 @@ struct spl_load_info {
> int bl_len;
> ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
> void *buf);
> + int (*fs_read)(struct spl_load_info *load, const char *filename,
> + void *buf, ulong file_offset, ulong size);
> };
>
> int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fdt);
> +int spl_fs_load_simple_fit(struct spl_load_info *info, const char *filename,
> + void *fit);
Please add a function comment (which apparently I missed also :-)
>
> #define SPL_COPY_PAYLOAD_ONLY 1
>
> --
> 2.1.4
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
