On 8.4.2016 18:08, Dan Murphy wrote: > The code assumed that if the interface is not RGMII configured > then it must be SGMII configured. This device has the ability > to support most of the MII interfaces. Therefore add the > helper for SGMII and only configure the device if the interface is > configured for SGMII. > > Signed-off-by: Dan Murphy <[email protected]> > --- > drivers/net/phy/ti.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c > index d503eef..4402c52 100644 > --- a/drivers/net/phy/ti.c > +++ b/drivers/net/phy/ti.c > @@ -219,7 +219,7 @@ static int dp83867_config(struct phy_device *phydev) > (dp83867->fifo_depth << > DP83867_PHYCR_FIFO_DEPTH_SHIFT)); > if (ret) > goto err_out; > - } else { > + } else if (phy_interface_is_sgmii(phydev)) { > phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, > (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000)); > >
Reviewed-by: Michal Simek <[email protected]> Thanks, Michal _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
