On the LS102x boards, in order to initialize the ICID values of masters, the dev_stream_id array holds absolute offsets from the base of SCFG.
In ls102xa_config_ssmu_stream_id, the base pointer is cast to uint32_t * before adding the offset, leading to an invalid address. Casting it to unsigned char * solves the issue. Also minor cosmetic renaming of uint32_t into u32 to be consistent in the whole file. Signed-off-by: Vincent Siles <[email protected]> --- board/freescale/common/ls102xa_stream_id.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c index f434269..2a4ef3e 100644 --- a/board/freescale/common/ls102xa_stream_id.c +++ b/board/freescale/common/ls102xa_stream_id.c @@ -10,11 +10,11 @@ void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num) { - uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR; + unsigned char *scfg = (unsigned char *)CONFIG_SYS_FSL_SCFG_ADDR; int i; for (i = 0; i < num; i++) - out_be32(scfg + id[i].offset, id[i].stream_id); + out_be32((u32 *)(scfg + id[i].offset), id[i].stream_id); } void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size) @@ -28,6 +28,6 @@ void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size) else liodn = tbl[i].id[0]; - out_le32((uint32_t *)(tbl[i].reg_offset), liodn); + out_le32((u32 *)(tbl[i].reg_offset), liodn); } } -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
