On 19/04/16 14:25, Lukasz Majewski wrote: > Hi Roger, > >> Hi Lukasz, >> >> On 19/04/16 12:02, Lukasz Majewski wrote: >>> Hi Roger, >>> >>>> Request size can be greater than ep.packet and still end in a >>>> short packet. We need to tackle this case as end of transfer >>>> (if short_not_ok is not set) as indicated in USB 2.0 Specification >>>> [1], else we get stuck up on certain protocols like fastboot. >>>> >>>> [1] - USB2.0 Specification, Section 5.3.2 Pipes >>>> >>>> Reported-by: Steve Rae <[email protected]> >>>> Signed-off-by: Roger Quadros <[email protected]> >>>> Tested-by: Steve Rae <[email protected]> >>>> --- >>>> drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c >>>> b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c index bce9c30..a31d875 >>>> 100644 --- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c >>>> +++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c >>>> @@ -229,7 +229,7 @@ static void complete_rx(struct dwc2_udc *dev, >>>> u8 ep_num) ROUND(xfer_size, CONFIG_SYS_CACHELINE_SIZE)); >>>> >>>> req->req.actual += min(xfer_size, req->req.length - >>>> req->req.actual); >>>> - is_short = (xfer_size < ep->ep.maxpacket); >>>> + is_short = xfer_size % ep->ep.maxpacket; >>> >>> is_short is a flag - so maybe it would be better to write something >>> like: >> >> but it is defined as u32 so I thought it might as well print the >> short packet length instead of just 1/0. > > I mean that it looks strange for me in debug message when one see: > > "is_short: 8" (as it was shown at Steve's output).
Agreed. I'll convert it to boolean then. -- cheers, -roger _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
