Hi Pablo, On Thu, Apr 21, 2016 at 4:22 AM, Pablo Fonovich <[email protected]> wrote: > Hi: > > I previously worked with u-boot for beaglebone black for booting a custom > linux system. Now the university got a donnation of some galileo boards, and > we want to do something similar. > > The problem is that we don't know what we need to put into the sd card to > make the board boot from it... With beaglebone i had to copy the u-boot.img > and MLO, but is not the same with galileo an we don't know where to find > that information. >
You need a SPI flash programmer to burn u-boot.rom into the SPI flash. Unlike most ARM boards, U-Boot boots directly from reset vector on IA, thus there is no way to put u-boot.rom on an SD card and let the processor boot from there. > > We used galileo_defconfig and instructions in README_x86 for building > u-boot, but now we do not know how to proceed. Anyone could give me some > hints? > Regards, Bin _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
