Hi Angelo, On 15 April 2016 at 10:38, Angelo Dureghello <[email protected]> wrote: > Hi Simon, > > > On 15/04/2016 17:23, Simon Glass wrote: >> >> Hi Angelo, >> >> On 15 April 2016 at 08:42, Angelo Dureghello <[email protected]> wrote: >>> >>> Hi Simon, >>> >>> >>> On 15/04/2016 16:14, Simon Glass wrote: >>>> >>>> >>>> Hi Angelo, >>>> >>>> On 27 December 2015 at 21:22, Simon Glass <[email protected]> wrote: >>>>> >>>>> >>>>> On 20 December 2015 at 08:54, Angelo Dureghello <[email protected]> >>>>> wrote: >>>>>> >>>>>> >>>>>> To use serial uclass and DM, CONFIG_SYS_MALLOC_F must be used. >>>>>> So CONFIG_SYS_GENERIC_GLOBAL_DATA has been undefined and >>>>>> call to board_init_f_mem() is added for all cpu's. >>>>>> >>>>>> Signed-off-by: Angelo Dureghello <[email protected]> >>>>>> >>>>>> --- >>>>>> >>>>>> Changes in v2: None >>>>>> >>>>>> arch/m68k/cpu/mcf5227x/start.S | 8 ++++++++ >>>>>> arch/m68k/cpu/mcf523x/start.S | 8 ++++++++ >>>>>> arch/m68k/cpu/mcf52x2/start.S | 8 ++++++++ >>>>>> arch/m68k/cpu/mcf530x/cpu_init.c | 2 +- >>>>>> arch/m68k/cpu/mcf530x/start.S | 8 ++++++++ >>>>>> arch/m68k/cpu/mcf532x/start.S | 8 ++++++++ >>>>>> arch/m68k/cpu/mcf5445x/start.S | 8 ++++++++ >>>>>> arch/m68k/cpu/mcf547x_8x/start.S | 8 ++++++++ >>>>>> arch/m68k/include/asm/config.h | 2 -- >>>>>> 9 files changed, 57 insertions(+), 3 deletions(-) >>>>> >>>>> >>>>> >>>>> Reviewed-by: Simon Glass <[email protected]> >>>> >>>> >>>> >>>> Unfortunately this breaks a lot of boards so I cannot apply it: >>>> >>>> 22: m68k: add malloc memory for early malloc >>>> m68k: + M5475FFE M5475GFE M5485AFE M5475BFE M52277EVB >>>> M5485FFE M54451EVB M54418TWR_nand_rmii M54418TWR_serial_mii M5475EFE >>>> M5485CFE M54451EVB_stmicro M5485BFE M5485HFE M54418TWR_serial_rmii >>>> M5475DFE M52277EVB_stmicro M5475AFE M5485GFE M54418TWR_nand_mii >>>> eb_cpu5282_internal amcore M53017EVB M54418TWR_nand_rmii_lowfreq >>>> M54418TWR M5475CFE M5485EFE M5485DFE eb_cpu5282 >>>> +arch/m68k/cpu/mcf547x_8x/start.o: In function `_start': >>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153: undefined reference to >>>> `board_init_f_mem' >>>> +build/../arch/m68k/cpu/mcf547x_8x/start.S:153:(.text+0x470): >>>> relocation truncated to fit: R_68K_PC16 against undefined symbol >>>> `board_init_f_mem' >>>> +make[1]: *** [u-boot] Error 1 >>>> +make: *** [sub-make] Error 2 >>>> +arch/m68k/cpu/mcf5227x/start.o: In function `_start': >>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384: undefined reference to >>>> `board_init_f_mem' >>>> +arch/m68k/cpu/mcf5445x/start.o: In function `_start': >>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669: undefined reference to >>>> `board_init_f_mem' >>>> +build/../arch/m68k/cpu/mcf5445x/start.S:669:(.text+0x41c): relocation >>>> truncated to fit: R_68K_PC16 against undefined symbol >>>> `board_init_f_mem' >>>> +build/../arch/m68k/cpu/mcf5227x/start.S:384:(.text+0x44a): relocation >>>> truncated to fit: R_68K_PC16 against undefined symbol >>>> `board_init_f_mem' >>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_after_flashbar_copy': >>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203: undefined reference to >>>> `board_init_f_mem' >>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x494): relocation >>>> truncated to fit: R_68K_PC16 against undefined symbol >>>> `board_init_f_mem' >>>> +arch/m68k/cpu/mcf530x/start.o: In function `_start': >>>> +build/../arch/m68k/cpu/mcf530x/start.S:142: undefined reference to >>>> `board_init_f_mem' >>>> +build/../arch/m68k/cpu/mcf530x/start.S:142:(.text+0x45e): relocation >>>> truncated to fit: R_68K_PC16 against undefined symbol >>>> `board_init_f_mem' >>>> +arch/m68k/cpu/mcf532x/start.o: In function `_start': >>>> +build/../arch/m68k/cpu/mcf532x/start.S:160: undefined reference to >>>> `board_init_f_mem' >>>> +arch/m68k/cpu/mcf52x2/start.o: In function `_start': >>>> +build/../arch/m68k/cpu/mcf52x2/start.S:203:(.text+0x456): relocation >>>> truncated to fit: R_68K_PC16 against undefined symbol >>>> `board_init_f_mem' >>>> >>> >>> Issue was not there at that submit time, now it seems due to growing of >>> u-boot size. >>> >>> The "truncated to fit" issue is fixed with this patch. >>> >>> https://patchwork.ozlabs.org/patch/609150/ >>> >>> So if you apply the above, and then this current, all should work. >> >> >> There is mention of a v2 patch there - is it coming? >> > > No, v2 was an attempt to fix the issue trough the linker script, but was too > complex. > So this is the definitive patch.
I'm not really sure what to do here - the patches do not apply cleanly to mainline. Can you please point me to the patches that should be applied, and the order? Or perhaps resend if necessary. I am trying this: http://patchwork.ozlabs.org/bundle/sjg/dm6/ Regards, Simon _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
