On 21 April 2016 at 16:03, Stephen Warren <[email protected]> wrote: > From: Stephen Warren <[email protected]> > > This imports v11 of "Jetson TK1 Development Platform Pin Mux" from > https://developer.nvidia.com/embedded/downloads. > > The new version defines the mux option for the MIPI pad ctrl selection. > The OWR pin no longer has an entry in the configuration table because > the only mux option it support is OWR, that feature isn't supported, and > hence can't conflict with any other pin. This pin can only usefully be > used as a GPIO. > > Signed-off-by: Stephen Warren <[email protected]> > --- > Note that the cleanup series I sent on Tuesday accidentally depends on > this being applied first. I'd expect this to have higher priority than > the cleanup series and be applied earlier anyway. > > board/nvidia/jetson-tk1/jetson-tk1.c | 3 +++ > board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h | 12 +++++++++++- > 2 files changed, 14 insertions(+), 1 deletion(-)
Reviewed-by: Simon Glass <[email protected]> _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
