On 26/04/2016 17:58, Fabio Estevam wrote: > Tom/Stefano, > > On Wed, Apr 20, 2016 at 10:48 PM, Fabio Estevam <feste...@gmail.com> wrote: >> From: Fabio Estevam <fabio.este...@nxp.com> >> >> mx6ul_evk does not come with a eMMC populated, so we should not >> define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able >> to boot some brands of SD cards, such as SanDisk microSD HC - 8GB: >> >> U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11) >> Trying to boot from MMC1 >> spl: mmc block read error >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns >> MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot >> via SD card. >> >> Signed-off-by: Fabio Estevam <fabio.este...@nxp.com> > > Could this one be applied for 2016.05?
I pick it up Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
