Hi,
On 3.5.2016 11:05, Lokesh Vutla wrote:
> This provides a way to load a FIT containing U-Boot and a selection of device
> tree files from a File system. Making sure that all the reads and writes
> are aligned to their respective needs.
>
> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
> ---
> - Assuming info->priv is used for passing filename for now and using this for
> detecting if it a fs read. If this is not preferred I can create a new field
> for filename.
>
> common/spl/spl_fit.c | 76
> +++++++++++++++++++++++++++++++++++++++++-----------
> include/spl.h | 10 +++++++
> 2 files changed, 71 insertions(+), 15 deletions(-)
>
> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> index b1cfa97..d696354 100644
> --- a/common/spl/spl_fit.c
> +++ b/common/spl/spl_fit.c
> @@ -82,6 +82,42 @@ static int spl_fit_select_fdt(const void *fdt, int images,
> int *fdt_offsetp)
> return -ENOENT;
> }
>
> +static int get_aligned_image_offset(struct spl_load_info *info, int offset)
> +{
> + /*
> + * If it is a FS read, get the first address before offset which is
> + * aligned to ARCH_DMA_MINALIGN. If it is raw read return the
> + * block number to which offset belongs.
> + */
> + if (info->priv)
> + return offset & ~(ARCH_DMA_MINALIGN - 1);
> + else
> + return offset / info->bl_len;
> +}
> +
> +static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
> +{
> + /*
> + * If it is a FS read, get the difference between the offset and
> + * the first address before offset which is aligned to
> + * ARCH_DMA_MINALIGN. If it is raw read return the offset within the
> + * block.
> + */
> + if (info->priv)
> + return offset & (ARCH_DMA_MINALIGN - 1);
> + else
> + return offset % info->bl_len;
> +}
> +
> +static int get_aligned_image_size(struct spl_load_info *info, int data_size,
> + int offset)
> +{
> + if (info->priv)
> + return data_size + get_aligned_image_overhead(info, offset);
> + else
> + return (data_size + info->bl_len - 1) / info->bl_len;
> +}
> +
> int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit)
> {
> int sectors;
> @@ -91,7 +127,7 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong
> sector, void *fit)
> void *load_ptr;
> int fdt_offset, fdt_len;
> int data_offset, data_size;
> - int base_offset;
> + int base_offset, align_len;
> int src_sector;
> void *dst;
>
> @@ -117,8 +153,10 @@ int spl_load_simple_fit(struct spl_load_info *info,
> ulong sector, void *fit)
> * In fact the FIT has its own load address, but we assume it cannot
> * be before CONFIG_SYS_TEXT_BASE.
> */
> - fit = (void *)(CONFIG_SYS_TEXT_BASE - size - info->bl_len);
> - sectors = (size + info->bl_len - 1) / info->bl_len;
> + align_len = ARCH_DMA_MINALIGN - 1;
> + fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
> + align_len) & ~align_len);
> + sectors = get_aligned_image_size(info, size, 0);
> count = info->read(info, sector, sectors, fit);
> debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
> sector, sectors, fit, count);
> @@ -151,19 +189,23 @@ int spl_load_simple_fit(struct spl_load_info *info,
> ulong sector, void *fit)
> * byte will be at 'load'. This may mean we need to load it starting
> * before then, since we can only read whole blocks.
> */
> - sectors = (data_size + info->bl_len - 1) / info->bl_len;
> + sectors = get_aligned_image_size(info, data_size, data_offset);
> data_offset += base_offset;
> load_ptr = (void *)load;
> debug("U-Boot size %x, data %p\n", data_size, load_ptr);
> - dst = load_ptr - (data_offset % info->bl_len);
> + dst = load_ptr;
>
> /* Read the image */
> - src_sector = sector + data_offset / info->bl_len;
> - debug("image: data_offset=%x, dst=%p, src_sector=%x, sectors=%x\n",
> - data_offset, dst, src_sector, sectors);
> + src_sector = sector + get_aligned_image_offset(info, data_offset);
> + debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
> + dst, src_sector, sectors);
> count = info->read(info, src_sector, sectors, dst);
> if (count != sectors)
> return -EIO;
> + debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
> + data_size);
> + memcpy(dst, dst + get_aligned_image_overhead(info, data_offset),
> + data_size);
>
> /* Figure out which device tree the board wants to use */
> fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset);
> @@ -173,14 +215,15 @@ int spl_load_simple_fit(struct spl_load_info *info,
> ulong sector, void *fit)
> /*
> * Read the device tree and place it after the image. There may be
> * some extra data before it since we can only read entire blocks.
> + * And also align the destination address to ARCH_DMA_MINALIGN.
> */
> - dst = load_ptr + data_size;
> + dst = (void *)((load + data_size + align_len) & ~align_len);
> fdt_offset += base_offset;
> - sectors = (fdt_len + info->bl_len - 1) / info->bl_len;
> - count = info->read(info, sector + fdt_offset / info->bl_len, sectors,
> - dst);
> - debug("fit read %x sectors to %x, dst %p, data_offset %x\n",
> - sectors, spl_image.load_addr, dst, fdt_offset);
> + sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
> + src_sector = sector + get_aligned_image_offset(info, fdt_offset);
> + count = info->read(info, src_sector, sectors, dst);
> + debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
> + dst, src_sector, sectors);
> if (count != sectors)
> return -EIO;
>
> @@ -189,7 +232,10 @@ int spl_load_simple_fit(struct spl_load_info *info,
> ulong sector, void *fit)
> * After this we will have the U-Boot image and its device tree ready
> * for us to start.
> */
> - memcpy(dst, dst + fdt_offset % info->bl_len, fdt_len);
> + debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
> + fdt_len);
> + memcpy(load_ptr + data_size,
> + dst + get_aligned_image_overhead(info, fdt_offset), fdt_len);
>
> return 0;
> }
> diff --git a/include/spl.h b/include/spl.h
> index de4f70a..358e81b 100644
> --- a/include/spl.h
> +++ b/include/spl.h
> @@ -45,6 +45,16 @@ struct spl_load_info {
> void *buf);
> };
>
> +/**
> + * spl_load_simple_fit() - Loads a fit image from a device.
> + * @info: Structure containing the information required to load data.
> + * @sector: Sector number where FIT image is located in the device
> + * @fdt: Pointer to the copied FIT header.
> + *
> + * Reads the FIT image @sector in the device. Loads u-boot image to
> + * specified load address and copies the dtb to end of u-boot image.
> + * Returns 0 on success.
> + */
> int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fdt);
>
> #define SPL_COPY_PAYLOAD_ONLY 1
>
this is not working for me. I haven't had a time to look at it
but you might know where the problem is.
Thanks,
Michal
U-Boot SPL 2016.05-rc3-00067-g01d410633461-dirty (May 03 2016 - 14:43:30)
Trying to boot from MMC1
reading u-boot.bin
reading u-boot.img
Found FIT
spl_fit_read: name u-boot.img, file_offset 0, size 44c, buf 7fffb40
reading u-boot.img
spl_fit_read: error reading image u-boot.img, ret - 0
fit read sector 0, sectors=1100, dst=0000000007fffb40, count=1100
data_offset=0, data_size=80310
U-Boot size 80310, data 0000000008000000
Aligned image read: dst=0000000008000000, src_sector=440, sectors=80310
spl_fit_read: name u-boot.img, file_offset 440, size 80310, buf 8000000
reading u-boot.img
spl_fit_read: error reading image u-boot.img, ret - 0
image: dst=0000000008000000, data_offset=44c, size=80310
Selecting config 'zynqmp-zcu102', fdt 'fdt@1'
FIT: Selected 'zynqmp-zcu102'
spl_fit_read: name u-boot.img, file_offset 80740, size 6603, buf 8080340
reading u-boot.img
** Unable to read file u-boot.img **
spl_fit_read: error reading image u-boot.img, ret - -1
Aligned fdt read: dst 0000000008080340, src_sector = 80740, sectors 6603
reading u-boot.img
spl_load_image_fat: error reading image u-boot.img, err - -1
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
