It is not mandatory for Layerscape SoCs to have SMMU. SoCs like
LS1012A are layerscape SoC without SMMU IP.
So put SMMU configuration code under SMMU_BASE.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
---
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 04831ca..d743ffe 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -94,11 +94,13 @@ ENTRY(lowlevel_init)
bl ccn504_set_qos
#endif
+#ifdef SMMU_BASE
/* Set the SMMU page size in the sACR register */
ldr x1, =SMMU_BASE
ldr w0, [x1, #0x10]
orr w0, w0, #1 << 16 /* set sACR.pagesize to indicate 64K page */
str w0, [x1, #0x10]
+#endif
/* Initialize GIC Secure Bank Status */
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
