Dear Simon Kagstrom, In message <20090825091256.0fc00...@marrow.netinsight.se> you wrote: > > Small update: I've tried with the ELDK toolchains 4.1 and 4.2 > (2007-01-21 and 2008-11-24). Both these fail as well, albeit in a > slightly different way. The printfs are correct, but 4.2 still has the > nand_bbt issue: > > U-Boot 2009.08-rc3-00013-g853ae64 (Aug 25 2009 - 08:28:05) > Marvell-OpenRD_base > > SoC: Kirkwood 88F6281_A0 > DRAM: 512 MB > NAND: 512 MiB > nand_bbt: Can't scan flash and build the RAM-based BBT > Net: egiga0 > 88E1116 Initialized on egiga0 > Hit any key to stop autoboot: 0 > Marvell>> > > The 4.1 version just hangs on the NAND printout. I've tested both with > USE_PRIVATE_LIBGCC=yes and USE_PRIVATE_LIBGCC unset, and get the same > results.
Did you make any progress an analyzing the cause of the issue? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "They that can give up essential liberty to obtain a little temporary saftey deserve neither liberty not saftey." - Benjamin Franklin, 1759 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
