On Apr 28, 2016, at 12:07 AM, Eddy Petrișor <[email protected]> wrote:
> From: Eddy Petrișor <[email protected]> > > Add initial support for NXP's S32V234 SoC and S32V234EVB board. > > The S32V230 family is designed to support computation-intensive applications > for image processing. The S32V234, as part of the S32V230 family, is a > high-performance automotive processor designed to support safe > computation-intensive applications in the area of vision and sensor fusion. > > Code originally writen by: > Original-signed-off-by: Stoica Cosmin-Stefan > <[email protected]> > Original-signed-off-by: Mihaela Martinas <[email protected]> > Original-signed-off-by: Eddy Petrișor <[email protected]> > > Signed-off-by: Eddy Petrișor <[email protected]> > --- > […] > +#define CONFIG_CMD_ENV > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + "script=boot.scr\0" \ > + "uimage=uImage\0" \ > + "ramdisk=rootfs.uimg\0"\ > + "console=ttyLF0\0" \ > + "fdt_high=0xffffffff\0" \ > + "initrd_high=0xffffffff\0" \ > + "fdt_file=s32v234-evb.dtb\0" \ > + "fdt_addr=0xC2000000\0" \ > + "kernel_addr=0xC307FFC0\0" \ > + "ramdisk_addr=0xC4000000\0" \ > + "boot_fdt=try\0" \ > + "ip_dyn=yes\0" \ > + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ > + "mmcpart=1\0" \ > + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ > + "update_sd_firmware_filename=u-boot.imx\0" \ > + "update_sd_firmware=" \ > + "if test ${ip_dyn} = yes; then " \ > + "setenv get_cmd dhcp; " \ > + "else " \ > + "setenv get_cmd tftp; " \ > + "fi; " \ > + "if mmc dev ${mmcdev}; then " \ > + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ > + "setexpr fw_sz ${filesize} / 0x200; " \ > + "setexpr fw_sz ${fw_sz} + 1; " \ > + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ > + "fi; " \ > + "fi\0" \ > + "mmcargs=setenv bootargs console=${console},${baudrate} " \ > + "root=${mmcroot}\0" \ > + "loadbootscript=" \ > + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ > + "bootscript=echo Running bootscript from mmc ...; " \ > + "source\0" \ > + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr} > ${uimage}\0" \ > + "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} > ${ramdisk}\0" \ > + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ > + "jtagboot=echo Booting using jtag...; " \ > + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ > + "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \ > + "run loaduimage; run loadramdisk; run loadfdt;"\ > + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ > + "mmcboot=echo Booting from mmc ...; " \ > + "run mmcargs; " \ > + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ > + "if run loadfdt; then " \ > + "bootm ${loadaddr} - ${fdt_addr}; " \ > + "else " \ > + "if test ${boot_fdt} = try; then " \ > + "bootm; " \ > + "else " \ > + "echo WARN: Cannot load the DT; " \ > + "fi; " \ > + "fi; " \ > + "else " \ > + "bootm; " \ > + "fi;\0" \ > + "netargs=setenv bootargs console=${console},${baudrate} " \ > + "root=/dev/nfs " \ > + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ > + "netboot=echo Booting from net ...; " \ > + "run netargs; " \ > + "if test ${ip_dyn} = yes; then " \ > + "setenv get_cmd dhcp; " \ > + "else " \ > + "setenv get_cmd tftp; " \ > + "fi; " \ > + "${get_cmd} ${uimage}; " \ > + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ > + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ > + "bootm ${loadaddr} - ${fdt_addr}; " \ > + "else " \ > + "if test ${boot_fdt} = try; then " \ > + "bootm; " \ > + "else " \ > + "echo WARN: Cannot load the DT; " \ > + "fi; " \ > + "fi; " \ > + "else " \ > + "bootm; " \ > + "fi;\0" > + > +#define CONFIG_BOOTCOMMAND \ > + "mmc dev ${mmcdev}; if mmc rescan; then " \ > + "if run loadbootscript; then " \ > + "run bootscript; " \ > + "else " \ > + "if run loaduimage; then " \ > + "run mmcboot; " \ > + "else run netboot; " \ > + "fi; " \ > + "fi; " \ > + "else run netboot; fi" Do you think you could move all of that to distro boot (config_distro_defaults.h)? Alex _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
