Hi Peter, On Tuesday 10 May 2016 05:18 PM, Peter Robinson wrote: > Hi All, > > Not sure if this has been addressed since RC3 but thought I'd > highlight it just in case. I've not had time to test 2016.05 as much > as I'd like so playing a bit of catch up here.
Which defconfig are you using? Recently MMC is converted to DM, may be that could have caused some issue. Can you just disable EMMC_BOOT and try again? Thanks and regards, Lokesh > > I'm seeing two different errors: > > On a BBBlack booting off the emmc (2Gb variety) I see: > > U-Boot SPL 2016.05-rc3 (Apr 28 2016 - 10:53:41) > Trying to boot from MMC2 > Card did not respond to voltage select! > *** Warning - MMC init failed, using default environment > > On a BBGreen booting from a mSD card I see: > > U-Boot SPL 2016.05-rc3 (Apr 28 2016 - 10:53:41) > Trying to boot from MMC1 > Card doesn't support part_switch > MMC partition switch failed > *** Warning - MMC partition switch failed, using default environment > > Not sure if they're related. Built with gcc6 if that matters, or at > least for reference. > > Peter > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
