> -----Original Message----- > From: Alexander Graf [mailto:[email protected]] > Sent: Thursday, May 12, 2016 3:37 AM > To: york sun; Prabhakar Kushwaha; [email protected] > Cc: Pratiyush Srivastava; Abhimanyu Saini > Subject: Re: [U-Boot] [PATCH 8/9][v2] armv8: ls1012a: Add support of > ls1012aqds board > > > > On 11.05.16 17:59, York Sun wrote: > > On 05/11/2016 12:30 AM, Prabhakar Kushwaha wrote: > >> QorIQ LS1012A Development System (LS1012AQDS) is a high-performance > >> development platform, with a complete debugging environment. > >> The LS1012AQDS board supports the QorIQ LS1012A processor and is > >> optimized to support the high-bandwidth DDR3L memory and a full > >> complement of high-speed SerDes ports. > >> > >> Signed-off-by: Calvin Johnson <[email protected]> > >> Signed-off-by: Pratiyush Mohan Srivastava > >> <[email protected]> > >> Signed-off-by: Abhimanyu Saini <[email protected]> > >> Signed-off-by: Prabhakar Kushwaha <[email protected]> > >> --- > > [...] > > >> +/* Initial environment variables */ > >> +#define CONFIG_EXTRA_ENV_SETTINGS \ > >> + "initrd_high=0xffffffff\0" \ > >> + "verify=no\0" \ > >> + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ > >> + "loadaddr=0x80100000\0" \ > >> + "kernel_addr=0x100000\0" \ > >> + "ramdisk_addr=0x800000\0" \ > >> + "ramdisk_size=0x2000000\0" \ > >> + "fdt_high=0xffffffffffffffff\0" \ > >> + "initrd_high=0xffffffffffffffff\0" \ > >> + "kernel_start=0xa00000\0" \ > >> + "kernel_load=0xa0000000\0" \ > >> + "kernel_size=0x2800000\0" \ > >> + "console=ttyAMA0,38400n8\0" > >> + > >> +#define CONFIG_BOOTARGS "console=ttyS0,115200 > root=/dev/ram0 " \ > >> + "earlycon=uart8250,mmio,0x21c0500" > >> +#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read > $kernel_load "\ > >> + "$kernel_start $kernel_size && "\ > > Is SPI Flash the only boot method envisioned for these system?
SPI flash is only boot source in LS1012A > If not, wouldn't it make sense to make use of the distro boot framework? > Will it be possible to share more details on this. It can be used for other SoC having more than one boot-source --prabhakar _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
