On 17.5.2016 19:00, Stephen Warren wrote: > On 05/17/2016 10:56 AM, Michal Simek wrote: >> Hi Stephen, >> >> On 17.5.2016 18:50, Stephen Warren wrote: >>> On 05/17/2016 07:57 AM, Michal Simek wrote: >>>> If timeout happen it should be reported as fault. >>> >>> Presumably if a timeout occurs, the expected text does not appear, i.e. >>> the existing assert fails anyway? >>> >>> Anyway, it's useful to point out problems explicitly, so, >>> Acked-by: Stephen Warren <[email protected]> >> >> Unfortunately I found this issue when I was checking logs where I am >> getting this. >> >> ethernet@e000b000 Waiting for PHY auto negotiation to complete......... >> TIMEOUT ! >> BOOTP broadcast 1 >> BOOTP broadcast 2 >> BOOTP broadcast 3 >> DHCP client bound to address 192.168.0.107 (882 ms) >> Zynq> .Zynq> setenv serverip 192.168.0.105 >> >> I haven't looked at the exact reason why it is failing but IMHO it is >> worth to check. > > Oh, in that case I think I should withdraw my ack; in the log above, the > operation completed successfully, so I'm not convinced the test should > be marked a failure. I thought this change simply provided more detail > re: the cause of a test failure.
Is there any other way how to run just phy negotiation and mark this test as fail? Thanks Michal _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
