On 12 May 2016 at 13:32, Stephen Warren <swar...@wwwdotorg.org> wrote: > From: Stephen Warren <swar...@nvidia.com> > > P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The > combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B > port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion > headers. > > Currently, due to U-Boot's level of support for Tegra186, the only > features supported by U-Boot are the console UART and the on-board eMMC. > Additional features will be added over time. > > U-Boot has so far been tested by replacing the kernel image on the device > with a U-Boot binary. It is anticipated that U-Boot will eventually > replace the CCPLEX bootloader binary, as on previous chips. This hasn't > yet been tested. > > Signed-off-by: Stephen Warren <swar...@nvidia.com> > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/tegra186-p2771-0000.dts | 25 +++++++++++++++++++++++++ > arch/arm/mach-tegra/tegra186/Kconfig | 10 ++++++++++ > board/nvidia/p2771-0000/Kconfig | 16 ++++++++++++++++ > board/nvidia/p2771-0000/MAINTAINERS | 6 ++++++ > board/nvidia/p2771-0000/Makefile | 5 +++++ > board/nvidia/p2771-0000/p2771-0000.c | 7 +++++++ > configs/p2771-0000_defconfig | 31 +++++++++++++++++++++++++++++++ > include/configs/p2771-0000.h | 33 +++++++++++++++++++++++++++++++++ > 9 files changed, 134 insertions(+) > create mode 100644 arch/arm/dts/tegra186-p2771-0000.dts > create mode 100644 board/nvidia/p2771-0000/Kconfig > create mode 100644 board/nvidia/p2771-0000/MAINTAINERS > create mode 100644 board/nvidia/p2771-0000/Makefile > create mode 100644 board/nvidia/p2771-0000/p2771-0000.c > create mode 100644 configs/p2771-0000_defconfig > create mode 100644 include/configs/p2771-0000.h
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
