From: Hou Zhiqiang <zhiqiang....@nxp.com>

If the PSCI and PPA is ready, skip the fixup for spin-table and
waking secondary cores. If not, change SMP method to spin-table,
and the device node of PSCI will be removed.

Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
---
V4:
 - Reordered this patch.

 arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 14 +++++++++++---
 arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c 
b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 672a453..937f7ec 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -23,6 +23,9 @@
 #ifdef CONFIG_FSL_ESDHC
 #include <fsl_esdhc.h>
 #endif
+#ifdef CONFIG_FSL_LS_PPA
+#include <asm/armv8/sec_firmware.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -625,9 +628,14 @@ int arch_early_init_r(void)
 #endif
 
 #ifdef CONFIG_MP
-       rv = fsl_layerscape_wake_seconday_cores();
-       if (rv)
-               printf("Did not wake secondary cores\n");
+#if defined(CONFIG_FSL_LS_PPA) && defined(CONFIG_ARMV8_PSCI)
+       if (sec_firmware_validate())
+#endif
+       {
+               rv = fsl_layerscape_wake_seconday_cores();
+               if (rv)
+                       printf("Did not wake secondary cores\n");
+       }
 #endif
 
 #ifdef CONFIG_SYS_HAS_SERDES
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c 
b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 1e875c4..333b973 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -20,6 +20,9 @@
 #ifdef CONFIG_MP
 #include <asm/arch/mp.h>
 #endif
+#ifdef CONFIG_FSL_LS_PPA
+#include <asm/armv8/sec_firmware.h>
+#endif
 
 int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
 {
@@ -36,7 +39,35 @@ void ft_fixup_cpu(void *blob)
        int addr_cells;
        u64 val, core_id;
        size_t *boot_code_size = &(__secondary_boot_code_size);
+#if defined(CONFIG_FSL_LS_PPA) && defined(CONFIG_ARMV8_PSCI)
+       int node;
+#endif
+
+#if defined(CONFIG_FSL_LS_PPA) && defined(CONFIG_ARMV8_PSCI)
+       if (sec_firmware_validate()) {
+               /* remove psci DT node */
+               node = fdt_path_offset(blob, "/psci");
+               if (node >= 0)
+                       goto remove_psci_node;
+
+               node = fdt_node_offset_by_compatible(blob, -1, "arm,psci");
+               if (node >= 0)
+                       goto remove_psci_node;
 
+               node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-0.2");
+               if (node >= 0)
+                       goto remove_psci_node;
+
+               node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-1.0");
+               if (node >= 0)
+                       goto remove_psci_node;
+
+remove_psci_node:
+               if (node >= 0)
+                       fdt_del_node(blob, node);
+       } else
+               return;
+#endif
        off = fdt_path_offset(blob, "/cpus");
        if (off < 0) {
                puts("couldn't find /cpus node\n");
-- 
2.1.0.27.g96db324

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to