2009/9/10 Scott Wood <scottw...@freescale.com>: > Gao Ya'nan wrote: >> >> 2009/9/10 Scott Wood <scottw...@freescale.com>: >>> >>> On Sat, Sep 05, 2009 at 02:41:19PM -0400, Jerry Van Baren wrote: >>>> >>>> I'm not up on 8xx, but it may not have been pulled forward into the >>>> "powerpc" architecture (still "ppc"). The "powerpc" architecture switch >>>> is where linux/u-boot started using the FDT. >>> >>> 8xx is supported in arch/powerpc. >> >> Yes, I have add CONFIG_OF_LIBFDT and CONFIG_OF_BOARD_SETUP for the FDT >> support which is missing in U-Boot-v2009.08, and it works well, but I >> found none complete document on how to write a dts file and add >> special device in it. >> >> Any tips? Thanks > > See Documentation/powerpc/booting-without-of.txt, > Documentation/powerpc/dts-bindings, and the ePAPR specification for > information on the content of device trees.
I miss the later two, thanks for your tips. Gao. > > -Scott > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot