From: Ye Li <ye...@nxp.com> LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3 is actually 1.2V.
Signed-off-by: Ye Li <ye...@nxp.com> Signed-off-by: Peng Fan <peng....@nxp.com> Cc: Stefano Babic <sba...@denx.de> Cc: Fabio Estevam <fabio.este...@nxp.com> --- board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index c3062f1..1f4fc03 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -171,7 +171,7 @@ static enum qn_level seq[3][2] = { static enum qn_func qn_output[8] = { qn_disable, qn_reset, qn_reset, qn_reset, qn_reset, qn_reset, qn_enable, - qn_enable + qn_disable }; static void iox74lv_init(void) -- 2.6.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot