Hi Sergey, On Tue, Jun 14, 2016 at 11:32:37AM -0700, Sergey Kubushyn wrote: >Here is the initial support for writing i.MX6 NAND U-Boot into NAND >with all FCB and DBBT stuff as required. > >Just build U-Boot for NAND as u-boot.imx, load it somehow in RAM and >say "nand bootupdate [addr] [size]". It will create all necessary >structures and write everything as needed. > >No SPL required, just plain single stage U-Boot. Supposed to write into >first NAND partition, recommended size 4MiB. Creates 4 redundant copies >of boot structures in first 4 sectors and 2 redundant copies of U-Boot >in the remaining space. > >Tested on a Variscite VAR-SOM-SOLO based board with i.MX6DL SoC. Will >probably post that board support files later, when config is cleaned up >so people could have a working NAND boot DCD portion to be able actually >use those braindead SOMs.
I would like to test this, but seems this patch is not rebased to lastest U-Boot (: Thanks, Peng. [...] _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot