Add CONFIG_{SD|NAND|ONENAND|SPI|QSPI|SATA}_BOOT kconfig entries. SoCs supports loading U-Boot from different medias to DRAM, such as i.MX6/7 supports loading U-Boot to DRAM from sd/emmc/nand/qspi/spi/sata and etc. For i.MX, imximage will generate different IVT headers according to boot medias.
Signed-off-by: Peng Fan <peng....@nxp.com> Cc: Simon Glass <s...@chromium.org> Cc: Heiko Schocher <h...@denx.de> Cc: Joe Hershberger <joe.hershber...@ni.com> Cc: Bin Meng <bmeng...@gmail.com> Cc: Christophe Ricard <christophe-h.ric...@st.com> Cc: Nikita Kiryanov <nik...@compulab.co.il> Cc: Francois Retief <fgret...@spaceteq.co.za> Cc: Tom Rini <tr...@konsulko.com> --- V2: Move NOR_BOOT to the patch 1/2. The idea of this patch is for adding different boot media support for i.MXes. And I'll post out following patches if this patch is accepted. I ran moveconfig.py, but I did not include the results into a patch. This patch does not break the boards which defined NAND_BOOT/SD_BOOT and etc, and I prefer to let board owners to move to defconfig later. common/Kconfig | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/common/Kconfig b/common/Kconfig index 04d092c..f0f6ee1 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -108,6 +108,54 @@ config NOR_BOOT as the ROM only partially sets up pinmux. We also default to using NOR for environment. +config NAND_BOOT + bool "Support for booting from NAND flash" + default n + help + Enabling this will make a U-Boot binary that is capable of being + booted via NAND flash. This is not a must, some SoCs need this, + somes not. + +config ONENAND_BOOT + bool "Support for booting from ONENAND" + default n + help + Enabling this will make a U-Boot binary that is capable of being + booted via ONENAND. This is not a must, some SoCs need this, + somes not. + +config QSPI_BOOT + bool "Support for booting from QSPI flash" + default n + help + Enabling this will make a U-Boot binary that is capable of being + booted via QSPI flash. This is not a must, some SoCs need this, + somes not. + +config SATA_BOOT + bool "Support for booting from SATA" + default n + help + Enabling this will make a U-Boot binary that is capable of being + booted via SATA. This is not a must, some SoCs need this, + somes not. + +config SD_BOOT + bool "Support for booting from SD/EMMC" + default n + help + Enabling this will make a U-Boot binary that is capable of being + booted via SD/EMMC. This is not a must, some SoCs need this, + somes not. + +config SPI_BOOT + bool "Support for booting from SPI flash" + default n + help + Enabling this will make a U-Boot binary that is capable of being + booted via SPI flash. This is not a must, some SoCs need this, + somes not. + endmenu config BOOTDELAY -- 2.6.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot