Stefan Roese wrote: > From: James Clough <[email protected]> > > On 405EZ the RX-/TX-interrupts are coalesced into one IRQ bit in the > UIC. We need to acknowledge the RX-/TX-interrupts in the > SDR0_ICINTSTAT reg as well. > > This problem was introduced with commit > d1631fe1 [ppc4xx: Consolidate PPC4xx UIC defines] > > Signed-off-by: James Clough <[email protected]> > Signed-off-by: Stefan Roese <[email protected]> > --- > drivers/net/4xx_enet.c | 9 +++++++++ > 1 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c > index 329eef0..9d438b5 100644 > --- a/drivers/net/4xx_enet.c > +++ b/drivers/net/4xx_enet.c > @@ -1717,6 +1717,15 @@ int enetInt (struct eth_device *dev) > rc = 0; > } > } > +#if defined(CONFIG_405EZ) > + /* > + * On 405EZ the RX-/TX-interrupts are coalesced into > + * one IRQ bit in the UIC. We need to acknowledge the > + * RX-/TX-interrupts in the SDR0_ICINTSTAT reg as well. > + */ > + mtsdr(SDR0_ICINTSTAT, > + SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT); > +#endif /* defined(CONFIG_405EZ) */ > } while (serviced); > > return (rc); > Applied to net repo.
thanks, Ben _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
