On 17 June 2016 at 09:43, Stephen Warren <swar...@wwwdotorg.org> wrote: > From: Stephen Warren <swar...@nvidia.com> > > A reset controller is a hardware module that controls reset signals that > affect other hardware modules or chips. > > This patch defines a standard API that connects reset clients (i.e. the > drivers for devices affected by reset signals) to drivers for reset > controllers/providers. Initially, DT is the only supported method for > connecting the two. > > The DT binding specification (reset.txt) was taken from Linux kernel > v4.5's Documentation/devicetree/bindings/reset/reset.txt. > > Signed-off-by: Stephen Warren <swar...@nvidia.com> > Acked-by: Simon Glass <s...@chromium.org> > --- > v2: Renamed header files. > --- > doc/device-tree-bindings/reset/reset.txt | 75 +++++++++++++++++ > drivers/Kconfig | 2 + > drivers/Makefile | 1 + > drivers/reset/Kconfig | 15 ++++ > drivers/reset/Makefile | 5 ++ > drivers/reset/reset-uclass.c | 131 ++++++++++++++++++++++++++++++ > include/dm/uclass-id.h | 1 + > include/reset-uclass.h | 81 +++++++++++++++++++ > include/reset.h | 135 > +++++++++++++++++++++++++++++++ > 9 files changed, 446 insertions(+) > create mode 100644 doc/device-tree-bindings/reset/reset.txt > create mode 100644 drivers/reset/Kconfig > create mode 100644 drivers/reset/Makefile > create mode 100644 drivers/reset/reset-uclass.c > create mode 100644 include/reset-uclass.h > create mode 100644 include/reset.h
Applied to u-boot-dm, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
