> -----Original Message----- > From: Wolfgang Denk [mailto:[email protected]] > Sent: Friday, September 11, 2009 9:37 PM > To: Hu Mingkai-B21284 > Cc: [email protected]; Wood Scott-B07421; Gala Kumar-B11780 > Subject: Re: [U-Boot] [PATCH v2 1/5] 85xx: add boot from > NAND/eSDHC/eSPI support > > Dear Mingkai Hu, > > In message > <[email protected]> > you wrote: > > The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch > > implements these three bootup methods in a unified way - > all of these > > use the general cpu/mpc85xx/start.S, and load the main > image to L2SRAM > > which lets us use the SPD to initialize the SDRAM. > > ... > > I'm confused. > > Is this v2 reposted? Or an updated version? > > Could you please be so kind and always note (below the "---" > line) what has changed against the previous version of the patch? >
Sorry for the confusion, this should be version 3. I'll make the note in the furture. This patch's modification against v2: - Use the NADN_SPL to comment the tlbsx and find_tlb_idx function for 4K NAND loader Thanks, Mingkai _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
