Currently we will already fill ethaddr with a fixed unique address
based on the SoCs serial (from the sid) to make sure that boards which
use the integrated emac / gmac get a fixed mac rather then a random one.
On some boards (observed on 2 tablets using sdio rtl8703as wifi chips)
the wifi does not come with a fixed mac either, so also set eth1addr,
so that dts files can set an ethernet1 alias to get mac-address and
local-mac-address filled for dt nodes describing the wifi controller.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
board/sunxi/board.c | 59 ++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 43 insertions(+), 16 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 78dfda5..955a44f 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -26,6 +26,7 @@
#endif
#include <asm/gpio.h>
#include <asm/io.h>
+#include <libfdt.h>
#include <nand.h>
#include <net.h>
#include <sy8106a.h>
@@ -609,36 +610,38 @@ static void parse_spl_header(const uint32_t spl_addr)
}
#endif
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
+static void setup_environment(const void *fdt)
{
char serial_string[17] = { 0 };
unsigned int sid[4];
uint8_t mac_addr[6];
- int ret;
-
-#if !defined(CONFIG_SPL_BUILD)
- setenv("fel_booted", NULL);
- setenv("fel_scriptaddr", NULL);
- /* determine if we are running in FEL mode */
- if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
- setenv("fel_booted", "1");
- parse_spl_header(SPL_ADDR);
- }
-#endif
+ char ethaddr[16];
+ int i, ret;
ret = sunxi_get_sid(sid);
if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
- if (!getenv("ethaddr")) {
+ for (i = 0; i < 4; i++) {
+ sprintf(ethaddr, "ethernet%d", i);
+ if (!fdt_get_alias(fdt, ethaddr))
+ continue;
+
+ if (i == 0)
+ strcpy(ethaddr, "ethaddr");
+ else
+ sprintf(ethaddr, "eth%daddr", i);
+
+ if (getenv(ethaddr))
+ continue;
+
/* Non OUI / registered MAC address */
- mac_addr[0] = 0x02;
+ mac_addr[0] = (i << 4) | 0x02;
mac_addr[1] = (sid[0] >> 0) & 0xff;
mac_addr[2] = (sid[3] >> 24) & 0xff;
mac_addr[3] = (sid[3] >> 16) & 0xff;
mac_addr[4] = (sid[3] >> 8) & 0xff;
mac_addr[5] = (sid[3] >> 0) & 0xff;
- eth_setenv_enetaddr("ethaddr", mac_addr);
+ eth_setenv_enetaddr(ethaddr, mac_addr);
}
if (!getenv("serial#")) {
@@ -648,6 +651,24 @@ int misc_init_r(void)
setenv("serial#", serial_string);
}
}
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ int ret;
+
+#if !defined(CONFIG_SPL_BUILD)
+ setenv("fel_booted", NULL);
+ setenv("fel_scriptaddr", NULL);
+ /* determine if we are running in FEL mode */
+ if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
+ setenv("fel_booted", "1");
+ parse_spl_header(SPL_ADDR);
+ }
+#endif
+
+ setup_environment(gd->fdt_blob);
#ifndef CONFIG_MACH_SUN9I
ret = sunxi_usb_phy_probe();
@@ -664,6 +685,12 @@ int ft_board_setup(void *blob, bd_t *bd)
{
int __maybe_unused r;
+ /*
+ * Call setup_environment again in case the boot fdt has
+ * ethernet aliases the u-boot copy does not have.
+ */
+ setup_environment(blob);
+
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
r = sunxi_simplefb_setup(blob);
if (r)
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
