On 2016年07月09日 22:39, Simon Glass wrote:
On 5 July 2016 at 04:06, Ziyuan Xu <[email protected]> wrote:
evb-3288 board RK3288-based development board with 2 USB ports, HDMI,
VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes
on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to
display pins, I2C, SPI, UART and GPIOs. This add some basic files
required to allow the board to output serial messaged and can run
command(mmc info etc).
evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC.
Signed-off-by: Ziyuan Xu <[email protected]>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3288-evb.dts | 59 +++++
arch/arm/dts/rk3288-evb.dtsi | 379 ++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/rk3288-board-spl.c | 4 +-
arch/arm/mach-rockchip/rk3288/Kconfig | 10 +
board/evb-rk3288/evb-rk3288/Kconfig | 15 ++
board/evb-rk3288/evb-rk3288/MAINTAINERS | 6 +
board/evb-rk3288/evb-rk3288/Makefile | 7 +
board/evb-rk3288/evb-rk3288/evb-rk3288.c | 15 ++
configs/evb-rk3288_defconfig | 67 ++++++
doc/README.rockchip | 3 +-
include/configs/evb-rk3288.h | 26 ++
12 files changed, 590 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/dts/rk3288-evb.dts
create mode 100644 arch/arm/dts/rk3288-evb.dtsi
create mode 100644 board/evb-rk3288/evb-rk3288/Kconfig
create mode 100644 board/evb-rk3288/evb-rk3288/MAINTAINERS
create mode 100644 board/evb-rk3288/evb-rk3288/Makefile
create mode 100644 board/evb-rk3288/evb-rk3288/evb-rk3288.c
create mode 100644 configs/evb-rk3288_defconfig
create mode 100644 include/configs/evb-rk3288.h
Reviewed-by: Simon Glass <[email protected]>
small nit below.
[snip]
diff --git a/board/evb-rk3288/evb-rk3288/evb-rk3288.c
b/board/evb-rk3288/evb-rk3288/evb-rk3288.c
new file mode 100644
index 0000000..a82f0ae
--- /dev/null
+++ b/board/evb-rk3288/evb-rk3288/evb-rk3288.c
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+void board_boot_order(u32 *spl_boot_list)
+{
+ /* eMMC prior to sdcard. */
nit: Can you drop the .?
okay, I wil drop it in next patch. Also add reviewed-by tag if you have
not another dissent.
Thanks!
+ spl_boot_list[0] = BOOT_DEVICE_MMC2;
+ spl_boot_list[1] = BOOT_DEVICE_MMC1;
+}
snip]
Regards,
Simon
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
