Hi Jian, > > For the moment I have no answer to this question. I need to dive into > the vxworks code, which > is not what I like to do now (but needs to be done)- > > Yes, please do track it down. The interrupt line register configured > by U-Boot should be enough for VxWorks to function under PIC mode. > > I have an other (wired) question you may could help out. > > http://www.mouser.com/pdfdocs/Intel_Platform_Controller_Hub_EG20T_datasheet.pdf > (page 124) > > On my development board the uart_clk is connected to a oscillator and > everything works as expected. > But on the production devices the uart_clk is not connected and fsp > hangs with post code 0x2e. > > I am not sure about the meaning of post code 0x2e. Jian has some > working experience on Atom E6xx with U-Boot. Adding him. > > 0x2e == POST_PRE_MRC (arch/x86/include/asm/post.h) > > Now I would like to change the initial mux settings to use usb_48mhz > but I am quite sure that I need > to have the pci bus and its devices initialised already in order to > change the CLKCFG register. Do you > think there is an other way of accessing this register like fixed > memory address etc? > > Which register do you want to program for this uart_clk? If it's on > the PCI configuration space, you can use PCI config APIs to program. > > There a handful of registers I would need to program but all of them are > accessible via pic config space. E.g CLKCFG: > > Size: 32-bit Default: 20000C00 Power Well: Core > Access PCI Configuration B:D:F D0:F0 Offset Start: Offset End: 500h 503h > Memory Mapped I/O BAR: PKTHubCTLBASE Offset: 500h > > > As I need to program those registers before fsp_init I must setup the pci > bus by myself, change the register values and call fsb_init routine. > Correct? > > My board had this problem too. I however toke a different approach > by patching the original FSP. The waiting for Topcliff UART ready is > completely > bypassed in all UEFI blobs. You can use UEFITool [1] to extract blobs in > the attached FSP for comparison. >
Sooo... I did use the UEFITool to compare your fsp with mine and yeah... some files are different. File_Raw_06A70056_3D0F_4A94_A743_5491CC9391D3_body.bin Section_PE32_image_47EA2673_2533_4C07_AABA_69CE5A7C5D35_PlatformLateInit_body.bin Section_PE32_image_47EA2673_2533_4C07_AABA_69CE5A7C5D35_PlatformLateInit_header.bin Section_PE32_image_4D1F48D8_0498_4C09_8EDE_72F30B58B1F2_MpInit_body.bin Section_PE32_image_74D3B506_EE9C_47ED_B749_41261401DA78_TCInitDxe_body.bin Section_TE_image_1BA0062E_C779_4582_8566_336AE8F78F09_Volume_Top_File_body.bin Section_TE_image_52C05B14_0B98_496C_BC3B_04B50211D680_PeiCore_body.bin Section_TE_image_86D70125_BAA3_4296_A62F_602BEBBB9081_DxeIpl_body.bin Section_TE_image_9618C0DC_50A4_496C_994F_7241F282ED01_PlatformEarlyInit_body.bin Section_TE_image_9B3ADA4F_AE56_4C24_8DEA_F03B7558AE50_PcdPeim_body.bin Section_TE_image_D2C69B26_82E1_4A1B_AD35_ED0261B9F347_MemoryInitPei_body.bin File_PEI_module_47EA2673_2533_4C07_AABA_69CE5A7C5D35_PlatformLateInit_info.txt File_PEI_module_4D1F48D8_0498_4C09_8EDE_72F30B58B1F2_MpInit_info.txt File_PEI_module_74D3B506_EE9C_47ED_B749_41261401DA78_TCInitDxe_info.txt Section_Compressed_47EA2673_2533_4C07_AABA_69CE5A7C5D35_PlatformLateInit_info.txt Section_Compressed_4D1F48D8_0498_4C09_8EDE_72F30B58B1F2_MpInit_info.txt Section_Compressed_74D3B506_EE9C_47ED_B749_41261401DA78_TCInitDxe_info.txt Section_PE32_image_47EA2673_2533_4C07_AABA_69CE5A7C5D35_PlatformLateInit_info.txt Section_PEI_dependency_47EA2673_2533_4C07_AABA_69CE5A7C5D35_PlatformLateInit_info.txt Section_PEI_dependency_4D1F48D8_0498_4C09_8EDE_72F30B58B1F2_MpInit_info.txt Any hint at what to look for? Sadly I am not an UEFI guy. greets -- Christian Gmeiner, MSc https://soundcloud.com/christian-gmeiner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot