Hi Stefan, On 18/07/2016 22:59, Stefan Agner wrote: > On 2016-07-13 00:25, Stefan Agner wrote: >> From: Stefan Agner <stefan.ag...@toradex.com> >> >> This patchset adds support for the Toradex i.MX 7Solo and 7Dual >> based computer on modules Colibri iMX7S/iMX7D. >> >> It also brings several smaller i.MX 7 related fixes/cleanups. > > Is there anything holding us back merging this patchset? > > It touches several subsystems, ultimately the final patch adding the new > board is depending on all of them. What is the plan how to merge it? >
I see all patches are assigned to me - that makes sense to avoid some kind of breakages. IMHO patches 1-4, 6-8 are ready to be merged. The best plan could be I start to apply them, and you resend an updated just for the ones to be changed. This should makes integration easier. Stefano > -- > Stefan > >> >> Changes since v1: >> - Dropped Ricoh RN5T567 PMIC support (for now) >> - Use CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG for runtime variables >> - Convert USB OTG Power Pin Polarity to Kconfig >> - Use gpio_request in lcd_setup >> >> Stefan Agner (9): >> dm: imx: serial: Support DTE mode when using driver model >> usb: move CONFIG_USB_EHCI_MX7 to Kconfig >> usb: ehci-mx6: configure power polarity in usb_power_config >> usb: ehci-mx6: introduce config for high active power pin >> mx7: set soc environment according to exact SoC type >> mx7_common: Put display board info config into board file >> mx7_common: use Kconfig for ARMv7 non-secure mode >> imx_watchdog: add weak attribute to reset_cpu function >> colibri_imx7: add Colibri iMX7S/iMX7D module support >> >> arch/arm/cpu/armv7/mx7/Kconfig | 9 + >> arch/arm/cpu/armv7/mx7/soc.c | 14 + >> board/toradex/colibri_imx7/Kconfig | 12 + >> board/toradex/colibri_imx7/MAINTAINERS | 6 + >> board/toradex/colibri_imx7/Makefile | 6 + >> board/toradex/colibri_imx7/colibri_imx7.c | 420 >> ++++++++++++++++++++++++++++++ >> board/toradex/colibri_imx7/imximage.cfg | 150 +++++++++++ >> configs/colibri_imx7_defconfig | 40 +++ >> configs/mx7dsabresd_defconfig | 3 + >> configs/warp7_defconfig | 4 + >> drivers/serial/serial_mxc.c | 9 +- >> drivers/usb/host/Kconfig | 16 ++ >> drivers/usb/host/ehci-mx6.c | 14 +- >> drivers/watchdog/imx_watchdog.c | 2 +- >> include/configs/colibri_imx7.h | 248 ++++++++++++++++++ >> include/configs/mx7_common.h | 10 +- >> include/configs/mx7dsabresd.h | 4 +- >> include/configs/warp7.h | 4 +- >> include/dm/platform_data/serial_mxc.h | 1 + >> 19 files changed, 953 insertions(+), 19 deletions(-) >> create mode 100644 board/toradex/colibri_imx7/Kconfig >> create mode 100644 board/toradex/colibri_imx7/MAINTAINERS >> create mode 100644 board/toradex/colibri_imx7/Makefile >> create mode 100644 board/toradex/colibri_imx7/colibri_imx7.c >> create mode 100644 board/toradex/colibri_imx7/imximage.cfg >> create mode 100644 configs/colibri_imx7_defconfig >> create mode 100644 include/configs/colibri_imx7.h -- stefano <stefano.ba...@babic.homelinux.org> GPG Key: 0x55814DDE Fingerprint 4E85 2A66 4CBA 497A 2A7B D3BF 5973 F216 5581 4DDE _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot