Hi Breno, Am 20.07.2016 um 22:20 schrieb Fabio Estevam: > On Wed, Jul 20, 2016 at 4:55 PM, Breno Lima <[email protected]> wrote: >> Commit c1ebf54868359005 ("imx_common: Return MMCSD_MODE_FS in spl_boot_mode() >> also for EXTFS") causes SPL breakage on wandboard: >> >> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c >> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c >> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c >> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c >> ** First descriptor is NOT a primary desc on 0:1 ** >> spl: no partition table found >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> This error is seen when SPL and u-boot.img are stored in the raw SD card >> partition. >> >> This reverts commit c1ebf54868359005c32944c1473668d5fcaca158. >> >> Signed-off-by: Breno Lima <[email protected]> > Thanks for the fix: > > Reviewed-by: Fabio Estevam <[email protected]>
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
