On 22 July 2016 at 15:38, Mugunthan V N <[email protected]> wrote: > On Friday 22 July 2016 10:55 AM, Vignesh R wrote: >> Populating QSPI_RD_SNGL bit(0x1) in priv->cmd means that value >> QSPI_INVAL (0x4) is not written to CMD field of QSPI_SPI_CMD_REG in >> ti_qspi_cs_deactivate(). Therefore CS is never deactivated between >> successive READ ID which results in sf probe to fail. >> Fix this by not populating priv->cmd with QSPI_RD_SNGL and OR it wih >> priv->cmd as required (similar to the convention followed in the >> driver). >> >> Signed-off-by: Vignesh R <[email protected]> > > Reviewed-by: Mugunthan V N <[email protected]>
Applied to u-boot-spi/master thanks! -- Jagan. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
