Add an example usage of binman for a sunxi board. This involves adding the
image definition to the device tree and using it in the Makefile.
This is for example only.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Makefile | 4 +---
arch/arm/dts/sun7i-a20-pcduino3.dts | 12 ++++++++++++
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 6155f11..8862b8b 100644
--- a/Makefile
+++ b/Makefile
@@ -1084,10 +1084,8 @@ u-boot-x86-16bit.bin: u-boot FORCE
endif
ifneq ($(CONFIG_SUNXI),)
-OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
- --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
- $(call if_changed,pad_cat)
+ $(call if_changed,binman)
endif
ifneq ($(CONFIG_TEGRA),)
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts
b/arch/arm/dts/sun7i-a20-pcduino3.dts
index 1a8b39b..141044e 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -42,6 +42,7 @@
*/
/dts-v1/;
+#include <config.h>
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
@@ -62,6 +63,17 @@
stdout-path = "serial0:115200n8";
};
+ binman {
+ filename = "u-boot-sunxi-with-spl.bin";
+ pad-byte = <0xff>;
+ blob {
+ filename = "spl/sunxi-spl.bin";
+ };
+ u-boot-img {
+ pos = <CONFIG_SPL_PAD_TO>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
--
2.8.0.rc3.226.g39d4020
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
