On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw slave0 for ethernet. This is controlled by pcf gpio line. Add appropriate mode-gpios DT entry so that driver can select the required slave.
Signed-off-by: Vignesh R <[email protected]> Reviewed-by: Tom Rini <[email protected]> --- v3: No change arch/arm/dts/dra72-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/dra72-evm.dts b/arch/arm/dts/dra72-evm.dts index 06fb3d895a27..9e395ac4564f 100644 --- a/arch/arm/dts/dra72-evm.dts +++ b/arch/arm/dts/dra72-evm.dts @@ -578,6 +578,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; }; &cpsw_emac1 { @@ -589,7 +590,6 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - active_slave = <1>; }; &dcan1 { -- 2.9.2 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
