[U-Boot] [PATCH 2/2] board: k2g: Enable ECC byte lane

[Lokesh Vutla]

Enable ECC byte lane for k2g-evm

Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
 arch/arm/mach-keystone/ddr3.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-keystone/ddr3.c b/arch/arm/mach-keystone/ddr3.c
index 34606f4..6b92530 100644
--- a/arch/arm/mach-keystone/ddr3.c
+++ b/arch/arm/mach-keystone/ddr3.c
@@ -65,9 +65,8 @@ void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config 
*phy_cfg)
        while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
                ;
 
-       /* Disable ECC for K2G */
        if (cpu_is_k2g()) {
-               clrbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET, 0x1);
+               setbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET, 0x1);
                clrbits_le32(base + KS2_DDRPHY_DATX8_5_OFFSET, 0x1);
                clrbits_le32(base + KS2_DDRPHY_DATX8_6_OFFSET, 0x1);
                clrbits_le32(base + KS2_DDRPHY_DATX8_7_OFFSET, 0x1);
-- 
2.9.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot