On Tue, Aug 30, 2016 at 12:52 AM, Jagan Teki <jagannadh.t...@gmail.com> wrote: > On Mon, Aug 29, 2016 at 1:34 PM, Chris Packham <judge.pack...@gmail.com> > wrote: >> On Mon, Aug 29, 2016 at 5:55 PM, Stefan Roese <s...@denx.de> wrote: >>> Hi Chris, >>> >>> (added Tom to Cc) >>> >>> On 29.08.2016 07:49, Chris Packham wrote: >>>> >>>> I'm updating support for a board which uses the Armada-385 from u-boot >>>> v2016.05 to use the latest master (v2016.09-rc2 plus a bit). >>>> >>>> When I run "sf probe" I get a divide by 0 in mvebu_spi_set_speed >>>> because hz has made it through as 0. > > Did you find this for first 'sf probe' it self? >
First "sf probe" command but internally a probe has already occurred because the environment is in SPI. >>>> >>>> When I run saveenv (env is in SPI) I don't get the divide by 0. >>>> >>>> I'll do some more digging tomorrow but just thought I'd get this email >>>> off now in case it rings any bells for anyone. >>> >>> >>> I've also stumbled over this issue last week. You (and everyone else) >>> need this patch: >>> >>> https://patchwork.ozlabs.org/patch/659979/ >>> >>> Jagan or Tom, please make sure that this patch gets added really soon. >>> Its really annoying. As updating the image in SPI nor does not work >>> without it. >>> >> >> Thanks Stefan and Vignesh for pointing me at the fix. It works on my board. > > Just wondered why would this worked with the second time unbound fix. > > -- > Jagan Teki > Free Software Engineer | www.openedev.com > U-Boot, Linux | Upstream Maintainer > Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot