On Wednesday 31 August 2016 12:36 AM, Andrew F. Davis wrote: > Depending on the boot media, different images are needed > for secure devices. The build generates u-boot*_HS_* files > as appropriate for the different boot modes. > > For AM33xx devices additional image types are needed for > various SPL boot modes as the ROM checks for the name of > the boot mode in the file it loads. > > Signed-off-by: Andrew F. Davis <a...@ti.com> > Reviewed-by: Tom Rini <tr...@konsulko.com>
Acked-by: Lokesh Vutla <lokeshvu...@ti.com> Thanks and regards, Lokesh > --- > arch/arm/cpu/armv7/am33xx/config.mk | 20 ++++++++++++++++++-- > 1 file changed, 18 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/cpu/armv7/am33xx/config.mk > b/arch/arm/cpu/armv7/am33xx/config.mk > index d4eb21c..431cf62 100644 > --- a/arch/arm/cpu/armv7/am33xx/config.mk > +++ b/arch/arm/cpu/armv7/am33xx/config.mk > @@ -12,13 +12,29 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y) > # For booting from SPI use > # u-boot-spl_HS_SPI_X-LOADER to program flash > # > -# For booting spl from all other media > -# use u-boot-spl_HS_ISSW > +# On AM43XX: > +# > +# For booting spl from all other media use > +# u-boot-spl_HS_ISSW > +# > +# On AM33XX: > +# > +# For booting spl from NAND flash use > +# u-boot-spl_HS_X-LOADER > +# > +# For booting spl from SD/MMC/eMMC media use > +# u-boot-spl_HS_MLO > +# > +# For booting spl over UART, USB, or Ethernet use > +# u-boot-spl_HS_2ND > # > # Refer to README.ti-secure for more info > # > ALL-y += u-boot-spl_HS_ISSW > ALL-$(CONFIG_SPL_SPI_SUPPORT) += u-boot-spl_HS_SPI_X-LOADER > +ALL-y += u-boot-spl_HS_X-LOADER > +ALL-y += u-boot-spl_HS_MLO > +ALL-y += u-boot-spl_HS_2ND > else > ALL-y += MLO > ALL-$(CONFIG_SPL_SPI_SUPPORT) += MLO.byteswap > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
