The SPL images are growing much bigger especially when DEBUG is ON. So need to fix the values for them.
Signed-off-by: Gong Qianyu <qianyu.g...@nxp.com> --- include/configs/ls1043a_common.h | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e55fcb2..fa20e6d 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -69,16 +69,22 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x110 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 #define CONFIG_SPL_TEXT_BASE 0x10000000 -#define CONFIG_SPL_MAX_SIZE 0x1d000 -#define CONFIG_SPL_STACK 0x1001e000 -#define CONFIG_SPL_PAD_TO 0x1d000 +/* + * CONFIG_SPL_MAX_SIZE is limited by OCRAM memory size(128 KiB) and + * a reserved stack size(4 KiB). + * So notice that even if DEBUG is ON, the SPL image(spl/u-boot-spl.bin) + * should not be > 124 KiB. + */ +#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */ +#define CONFIG_SPL_STACK 0x10020000 +#define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */ -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 @@ -101,11 +107,12 @@ #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000 -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 +#define CONFIG_SPL_MAX_SIZE 0x1d000 /* 116 KiB */ +#define CONFIG_SPL_STACK 0x1001f000 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -- 2.1.0.27.g96db324 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
