On 09/02/2016 12:40 AM, Daniel Allred wrote:
> Adds a secure dram reservation fixup for secure
> devices, when a region in the emif has been set aside
> for secure world use. The size is defined by the
> CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE config option.
> 
> Signed-off-by: Daniel Allred <[email protected]>
> ---
>  arch/arm/cpu/armv7/omap5/fdt.c | 64 
> ++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 62 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/omap5/fdt.c b/arch/arm/cpu/armv7/omap5/fdt.c
> index 0493cd1..da8d59b 100644
> --- a/arch/arm/cpu/armv7/omap5/fdt.c
> +++ b/arch/arm/cpu/armv7/omap5/fdt.c
> @@ -153,13 +153,73 @@ static int ft_hs_fixup_sram(void *fdt, bd_t *bd)
>  static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; }
>  #endif
>  
> +#if (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE != 0)
> +static int ft_hs_fixup_dram(void *fdt, bd_t *bd)
> +{
> +     const char *path, *subpath;
> +     int offs;
> +     u32 sec_mem_start = CONFIG_TI_SECURE_EMIF_REGION_START;
> +     u32 sec_mem_size = CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE;
> +     fdt64_t temp[2];
> +
> +     /* If start address is zero, place at end of DRAM */
> +     if (0 == sec_mem_start)
> +             sec_mem_start =
> +                     (CONFIG_SYS_SDRAM_BASE +
> +                     (omap_sdram_size() - sec_mem_size));
> +
> +     /* Delete any original secure_reserved node */
> +     path = "/reserved-memory/secure_reserved";
> +     offs = fdt_path_offset(fdt, path);
> +     if (offs >= 0)
> +             fdt_del_node(fdt, offs);
> +
> +     /* Add new secure_reserved node */
> +     path = "/reserved-memory";
> +     offs = fdt_path_offset(fdt, path);
> +     if (offs < 0) {
> +             debug("Node %s not found\n", path);
> +             path = "/";
> +             subpath = "reserved-memory";
> +             fdt_path_offset(fdt, path);

Are we supposed to be doing something with the result of this call? Who
sets 'offs' in this case?

> +             offs = fdt_add_subnode(fdt, offs, subpath);
> +             if (offs < 0) {
> +                     printf("Could not create %s%s node.\n", path, subpath);
> +                     return 1;
> +             }
> +             path = "/reserved-memory";
> +             offs = fdt_path_offset(fdt, path);
> +     }
> +
> +     subpath = "secure_reserved";
> +     offs = fdt_add_subnode(fdt, offs, subpath);
> +     if (offs < 0) {
> +             printf("Could not create %s%s node.\n", path, subpath);
> +             return 1;
> +     }
> +
> +     temp[0] = cpu_to_fdt64(((u64)sec_mem_start));
> +     temp[1] = cpu_to_fdt64(((u64)sec_mem_size));
> +     fdt_setprop_string(fdt, offs, "compatible",
> +                        "ti,dra7-secure-memory");
> +     fdt_setprop_string(fdt, offs, "status", "okay");
> +     fdt_setprop(fdt, offs, "no-map", NULL, 0);
> +     fdt_setprop(fdt, offs, "reg", temp, sizeof(temp));
> +
> +     return 0;
> +}
> +#else
> +static int ft_hs_fixup_dram(void *fdt, bd_t *bd) { return 0; }
> +#endif
> +
>  static void ft_hs_fixups(void *fdt, bd_t *bd)
>  {
>       /* Check we are running on an HS/EMU device type */
>       if (GP_DEVICE != get_device_type()) {
>               if ((ft_hs_fixup_crossbar(fdt, bd) == 0) &&
>                   (ft_hs_disable_rng(fdt, bd) == 0) &&
> -                 (ft_hs_fixup_sram(fdt, bd) == 0))
> +                 (ft_hs_fixup_sram(fdt, bd) == 0) &&
> +                 (ft_hs_fixup_dram(fdt, bd) == 0))
>                       return;
>       } else {
>               printf("ERROR: Incorrect device type (GP) detected!");
> @@ -171,7 +231,7 @@ static void ft_hs_fixups(void *fdt, bd_t *bd)
>  static void ft_hs_fixups(void *fdt, bd_t *bd)
>  {
>  }
> -#endif
> +#endif /* #ifdef CONFIG_TI_SECURE_DEVICE */
>  
>  /*
>   * Place for general cpu/SoC FDT fixups. Board specific
> 
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to