On Sep 21, 2009, at 11:53 PM, Mingkai Hu wrote: > When boot from NAND, the NAND flash must be connected to br/or0. > Also init RAM(L2 SRAM or DDR SDRAM) for load the second image to > it. > > Signed-off-by: Mingkai Hu <mingkai...@freescale.com> > --- > > ChangeLog: > - move the board specific config for br/or to board init file, i.e. > nand_spl/board/freescale/mpc8536ds/nand_boot.c, which make it common > for 85xx platform. > > cpu/mpc85xx/cpu_init_nand.c | 63 ++++++++++++++++++++++++++++++++++ > +++++++++ > 1 files changed, 63 insertions(+), 0 deletions(-) > create mode 100644 cpu/mpc85xx/cpu_init_nand.c
applied to 85xx - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot