Without this patch the following error will be shown:
stdio_add_devices: Video device failed (ret=-22)
As commit ec5507707a1d1e84056a6c864338f95f6118d3ca (video: tegra: Move
to using simple-panel and pwm-backlight) states the Colibri T20 needs
updating too which this patch finally attempts doing.
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
Changes in v3:
- Get rid of dummy N/C GPIO work around now as the fixed regulator
properly honours optionality of enable GPIO.
Changes in v2:
- Rename dummy regulator to reg_3v3 as suggested by Stephen.
- Keep dummy N/C GPIO to work around bug in U-Boot regulator driver
requiring such node despite its binding claiming it being optional.
arch/arm/dts/tegra20-colibri.dts | 71 +++++++++++++++++++++++++++++-----------
1 file changed, 51 insertions(+), 20 deletions(-)
diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts
index 2cf24d3..5b803d9 100644
--- a/arch/arm/dts/tegra20-colibri.dts
+++ b/arch/arm/dts/tegra20-colibri.dts
@@ -21,12 +21,24 @@
};
host1x@50000000 {
- status = "okay";
dc@54200000 {
- status = "okay";
rgb {
status = "okay";
nvidia,panel = <&lcd_panel>;
+ display-timings {
+ timing@0 {
+ /* VESA VGA */
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ hsync-len = <96>;
+ vback-porch = <31>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
+ };
};
};
};
@@ -60,6 +72,10 @@
};
};
+ pwm@7000a000 {
+ status = "okay";
+ };
+
/*
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
* board)
@@ -91,6 +107,18 @@
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ /* PWM<A> */
+ pwms = <&pwm 0 5000000>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -104,25 +132,28 @@
};
};
- pwm: pwm@7000a000 {
- status = "okay";
+ lcd_panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+
+ backlight = <&backlight>;
};
- lcd_panel: panel {
- clock = <25175000>;
- xres = <640>;
- yres = <480>;
- left-margin = <48>; /* horizontal back porch */
- right-margin = <16>; /* horizontal front porch */
- hsync-len = <96>;
- lower-margin = <11>; /* vertical front porch */
- upper-margin = <31>; /* vertical back porch */
- vsync-len = <2>;
- hsync-active-high;
- vsync-active-high;
- nvidia,bits-per-pixel = <16>;
- nvidia,pwm = <&pwm 0 0>;
- nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(T, 4)
GPIO_ACTIVE_HIGH>;
- nvidia,panel-timings = <0 0 0 0>;
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3v3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
};
--
2.5.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
