Hi Jagan,
On Sat, Sep 17, 2016 at 02:18:35AM +0530, Jagan Teki wrote:
>Added kconfig for IMX_THERMAL driver.
>Cc: Simon Glass <s...@chromium.org>
>Cc: Fabio Estevam <fabio.este...@nxp.com>
>Cc: Stefano Babic <sba...@denx.de>
>Cc: Peng Fan <peng....@nxp.com>
>Cc: Matteo Lisi <matteo.l...@engicam.com>
>Cc: Michael Trimarchi <mich...@amarulasolutions.com>
>Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> drivers/thermal/Kconfig | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>index 8e22ea7..f0ffbb3 100644
>--- a/drivers/thermal/Kconfig
>+++ b/drivers/thermal/Kconfig
>@@ -5,3 +5,16 @@ config DM_THERMAL
>         temperature sensors to permit warnings, speed throttling or even
>         automatic power-off when the temperature gets too high or low. Other
>         devices may be discrete but connected on a suitable bus.
>+config IMX_THERMAL
>+      bool "Temperature sensor driver for Freescale i.MX SoCs"
>+      depends on MX6

MX6 and MX7.
Also I think this line could be dropped, add "selects IMX_THERMAL" in board 


>+      help
>+        Support for Temperature Monitor (TEMPMON) found on Freescale i.MX 
>+          It supports one critical trip point and one passive trip point.  The
>+          cpufreq is used as the cooling device to throttle CPUs when the
>+          passive trip is crossed.
>+endif # if DM_THERMAL
>U-Boot mailing list
U-Boot mailing list

Reply via email to