This converts the following to Kconfig:
CONFIG_VIDEO_CT69000
Signed-off-by: Simon Glass <s...@chromium.org>
---
README | 23 -----------------------
configs/MIP405T_defconfig | 1 +
configs/MIP405_defconfig | 1 +
configs/PIP405_defconfig | 1 +
drivers/video/Kconfig | 27 +++++++++++++++++++++++++++
include/configs/MIP405.h | 1 -
include/configs/PIP405.h | 1 -
scripts/config_whitelist.txt | 1 -
8 files changed, 30 insertions(+), 26 deletions(-)
diff --git a/README b/README
index d3b0a1b..5df8b6b 100644
--- a/README
+++ b/README
@@ -1670,35 +1670,12 @@ CBFS (Coreboot Filesystem) support
instead.
- Video support:
- CONFIG_VIDEO_CT69000
-
- Enable Chips & Technologies 69000 Video chip
-
CONFIG_VIDEO_SMI_LYNXEM
Enable Silicon Motion SMI 712/710/810 Video chip. The
video output is selected via environment 'videoout'
(1 = LCD and 2 = CRT). If videoout is undefined, CRT is
assumed.
- For the CT69000 and SMI_LYNXEM drivers, videomode is
- selected via environment 'videomode'. Two different ways
- are possible:
- - "videomode=num" 'num' is a standard LiLo mode numbers.
- Following standard modes are supported (* is default):
-
- Colors 640x480 800x600 1024x768 1152x864 1280x1024
- -------------+---------------------------------------------
- 8 bits | 0x301* 0x303 0x305 0x161 0x307
- 15 bits | 0x310 0x313 0x316 0x162 0x319
- 16 bits | 0x311 0x314 0x317 0x163 0x31A
- 24 bits | 0x312 0x315 0x318 ? 0x31B
- -------------+---------------------------------------------
- (i.e. setenv videomode 317; saveenv; reset;)
-
- - "videomode=bootargs" all the video parameters are parsed
- from the bootargs. (See drivers/video/videomodes.c)
-
-
CONFIG_VIDEO_SED13806
Enable Epson SED13806 driver. This driver supports 8bpp
and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
diff --git a/configs/MIP405T_defconfig b/configs/MIP405T_defconfig
index 7445f4b..028a112 100644
--- a/configs/MIP405T_defconfig
+++ b/configs/MIP405T_defconfig
@@ -15,3 +15,4 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_FAT=y
CONFIG_SYS_NS16550=y
CONFIG_CFB_CONSOLE=y
+CONFIG_VIDEO_CT69000=y
diff --git a/configs/MIP405_defconfig b/configs/MIP405_defconfig
index 66f3eb8..ec76163 100644
--- a/configs/MIP405_defconfig
+++ b/configs/MIP405_defconfig
@@ -17,3 +17,4 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_CFB_CONSOLE=y
+CONFIG_VIDEO_CT69000=y
diff --git a/configs/PIP405_defconfig b/configs/PIP405_defconfig
index 5350d54..1f49c3b 100644
--- a/configs/PIP405_defconfig
+++ b/configs/PIP405_defconfig
@@ -17,3 +17,4 @@ CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_CFB_CONSOLE=y
+CONFIG_VIDEO_CT69000=y
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b73d1a3..20ae11e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -471,4 +471,31 @@ config CFB_CONSOLE_ANSI
erase functions and limited graphics rendition control). Normal
output from U-Boot will pass through this filter.
+config VIDEO_CT69000
+ bool "Enable Chips & Technologies 69000 video driver"
+ depends on VIDEO
+ help
+ This enables a frame buffer driver for the Chips & Technologies
+ ct69000, a fairly old graphics device (circa 2000) which is used
+ on some hardware. It operates over the ISA bus, and supports
+ some acceleration features.
+
+ For the CT69000 and SMI_LYNXEM drivers, videomode is
+ selected via environment 'videomode'. Two different ways
+ are possible:
+ - "videomode=num" 'num' is a standard LiLo mode numbers.
+ Following standard modes are supported (* is default):
+
+ Colors 640x480 800x600 1024x768 1152x864 1280x1024
+ -------------+---------------------------------------------
+ 8 bits | 0x301* 0x303 0x305 0x161 0x307
+ 15 bits | 0x310 0x313 0x316 0x162 0x319
+ 16 bits | 0x311 0x314 0x317 0x163 0x31A
+ 24 bits | 0x312 0x315 0x318 ? 0x31B
+ -------------+---------------------------------------------
+ (i.e. setenv videomode 317; saveenv; reset;)
+
+ - "videomode=bootargs" all the video parameters are parsed
+ from the bootargs. (See drivers/video/videomodes.c)
+
endmenu
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 8395041..d746ddb 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -346,7 +346,6 @@
/************************************************************
* Video support
************************************************************/
-#define CONFIG_VIDEO_CT69000
#define CONFIG_VIDEO_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VGA_AS_SINGLE_DEVICE
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index bf8d861..07514e2 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -302,7 +302,6 @@
/************************************************************
* Video support
************************************************************/
-#define CONFIG_VIDEO_CT69000
#define CONFIG_VIDEO_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VGA_AS_SINGLE_DEVICE
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index f56bbe7..f73e353 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -8285,7 +8285,6 @@ CONFIG_VIDEO_BMP_GZIP
CONFIG_VIDEO_BMP_LOGO
CONFIG_VIDEO_BMP_RLE8
CONFIG_VIDEO_CORALP
-CONFIG_VIDEO_CT69000
CONFIG_VIDEO_DA8XX
CONFIG_VIDEO_DT_SIMPLEFB
CONFIG_VIDEO_FONT_4X6
--
2.8.0.rc3.226.g39d4020
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
