On Mon, Sep 19, 2016 at 11:44 PM, Hans de Goede <hdego...@redhat.com> wrote:
> Hi,
>
>
> On 19-09-16 17:00, Tom Rini wrote:
>>
>> On Mon, Sep 19, 2016 at 04:53:04PM +0200, Hans de Goede wrote:
>>>
>>> Hi,
>>>
>>> On 19-09-16 16:03, Tom Rini wrote:
>>>>
>>>> Based on A13-OLinuXino, enable DFU and UMS support.
>>>>
>>>> Signed-off-by: Tom Rini <tr...@konsulko.com>
>>>> ---
>>>> With this change I've added DFU to my tests on this board, and assuming
>>>> a
>>>> follow up test with the SD image that kicks the board into FEL works,
>>>> I'll
>>>> then enable the UMS tests on this board (and add DFU to SD, not just DFU
>>>> to
>>>> RAM).
>>>>
>>>> configs/A20-OLinuXino-Lime2_defconfig | 8 ++++++++
>>>> 1 file changed, 8 insertions(+)
>>>>
>>>> diff --git a/configs/A20-OLinuXino-Lime2_defconfig
>>>> b/configs/A20-OLinuXino-Lime2_defconfig
>>>> index 23db07380624..54343de7f351 100644
>>>> --- a/configs/A20-OLinuXino-Lime2_defconfig
>>>> +++ b/configs/A20-OLinuXino-Lime2_defconfig
>>>> @@ -12,9 +12,17 @@
>>>> CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
>>>> CONFIG_SPL=y
>>>> # CONFIG_CMD_IMLS is not set
>>>> # CONFIG_CMD_FLASH is not set
>>>> +CONFIG_CMD_DFU=y
>>>> +CONFIG_CMD_USB_MASS_STORAGE=y
>>>
>>>
>>> Do you need CMD_USB_MASS_STORAGE for your tests ? Enabling
>>> CMD_USB_MASS_STORAGE really seems orthogonal to enabling GADGET
>>> mode to me, esp. since it is only useful in host mode AFAICT.
>>
>>
>> Ah, no, things have bad names perhaps.  CMD_USB_MASS_STORAGE enables
>> "ums" as a command which is what in turn will export MMC (or something
>> else) as a USB mass storage gadget over to the host.
>
>
> Ah, I thought this enabled the (destructive) low level usb mass storage
> block read/write test commands, but I guess I'm wrong.
>
> I wonder why Chen-Yu put it in the usb host enabling patch for
> an A33 board then...
>

It was copy pasted from some other defconfig. Like you, I thought it was
for host mode supporting USB sticks...

ChenYu

>>> Chen-Yu did something similar in a patch enabling host mode for a
>>> different sunxi board and here is what I replied:
>>>
>>> "
>>> If we want to enable CONFIG_CMD_USB_MASS_STORAGE on sunxi, we really
>>> should do so on all boards (feel free to submit a patch for this).
>>>
>>> e.g. add something like this to board/sunxi/Kconfig:
>>>
>>> config CMD_USB_MASS_STORAGE
>>>     default y
>
>
> Given the above, that should probably be:
>
> config CMD_USB_MASS_STORAGE
>        default y if USB_GADGET
>
>
> Hmm, I guess we may want to have a bunch of those, so that
> simply adding:
>
> CONFIG_USB_MUSB_GADGET=y
>
> To a defconfig enables the relevant related options...
>
> Regards,
>
> Hans
>
>
>
>>>
>>> So that we can still disable it in case there are space constraints,
>>> but normally we enable it on all sunxi boards offering a
>>> consistent set of available commands.
>>> "
>>
>>
>> I think it's a useful command that should be more widely exposed, yes.
>> IIRC, it's how the Tegra platforms support flashing their dev boards
>> with official images, and can be a handy "rescue" type option too.
>>
>>>
>>> The same goes for this patch, otherwise this patch is:
>>>
>>> Reviewed-by: Hans de Goede <hdego...@redhat.com>
>>>
>>> Ig you want to feel free to apply this directly
>>> (given that I've send out a sunxi pull-req recently).
>>
>>
>> OK, thanks.  I just might since I really want to move on to grabbing
>> some fs patches and before I do that I really want to have as much
>> testing of them as possible.
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to