This series supports Engicam i.CoreM6 QDL modules on top of u-boot-imx.git/next
and test on the respective starter kits as well.

Changes for v3:
        - Remove "v2 01/17 imx: iomux-v3: Fix build error with snvs base" patch
        - Remove 'default n' on Kconfig DEFAULT_FDT_FILE patch
        - Add minimal devicetree support for Engicam i.CoreM6 QDL
        - Add is_mx6dl()
        - Add is_mx6solo()
        - Use is_mx6dq()
        - Add last commit sha1 and header in pull devicetree files from Linux

Changes for v2:
        - Make static to local iomux structure in board file
        - Corrected rowaddr in mx6_ddr3_cfg
        - Used imx_ddr_size
        - Add FEC support and tested the same
        - Add DM_GPIO, DM_MMC support
        - Add pinctrl support
        - Add devicetree support

Jagan Teki (16):
  serial: Kconfig: Add MXC_UART entry
  thermal: Kconfig: Add IMX_THERMAL entry
  Kconfig: Add DEFAULT_FDT_FILE entry
  arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support
  imx6: icorem6: Add ENET support
  imx: s/docs\/README.imximage/doc\/README.imximage/g
  arm: dts: Add devicetree for i.MX6DL
  arm: dts: Add devicetree for i.MX6DQL
  arm: dts: imx6dl: Add pinctrl defines
  dt-bindings: clock: imx6qdl: Add clock defines
  arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo
  imx6q: icorem6: Enable pinctrl driver
  engicam: icorem6: Add DM_GPIO, DM_MMC support
  arm: dts: Add devicetree for i.MX6Q
  arm: dts: imx6q: Add pinctrl defines
  arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual

 arch/arm/cpu/armv7/mx6/Kconfig              |   11 +
 arch/arm/dts/Makefile                       |    4 +-
 arch/arm/dts/imx6dl-icore.dts               |   59 ++
 arch/arm/dts/imx6dl-pinfunc.h               | 1091 +++++++++++++++++++++++
 arch/arm/dts/imx6dl.dtsi                    |  133 +++
 arch/arm/dts/imx6q-icore.dts                |   59 ++
 arch/arm/dts/imx6q-pinfunc.h                | 1047 ++++++++++++++++++++++
 arch/arm/dts/imx6q.dtsi                     |  300 +++++++
 arch/arm/dts/imx6qdl-icore.dtsi             |  196 ++++
 arch/arm/dts/imx6qdl.dtsi                   | 1281 +++++++++++++++++++++++++++
 arch/arm/include/asm/imx-common/sys_proto.h |    2 +
 board/barco/titanium/imximage.cfg           |    2 +-
 board/ccv/xpress/imximage.cfg               |    2 +-
 board/denx/m53evk/imximage.cfg              |    2 +-
 board/engicam/icorem6/Kconfig               |   12 +
 board/engicam/icorem6/MAINTAINERS           |    6 +
 board/engicam/icorem6/Makefile              |    6 +
 board/engicam/icorem6/README                |   38 +
 board/engicam/icorem6/icorem6.c             |  474 ++++++++++
 board/freescale/mx6sabresd/mx6dlsabresd.cfg |    2 +-
 board/freescale/mx6slevk/imximage.cfg       |    2 +-
 board/freescale/mx6ullevk/imximage.cfg      |    2 +-
 board/freescale/mx7dsabresd/imximage.cfg    |    2 +-
 board/freescale/s32v234evb/s32v234evb.cfg   |    2 +-
 board/freescale/vf610twr/imximage.cfg       |    2 +-
 board/phytec/pcm052/imximage.cfg            |    2 +-
 board/technexion/pico-imx6ul/imximage.cfg   |    2 +-
 board/toradex/colibri_imx7/imximage.cfg     |    2 +-
 board/toradex/colibri_vf/imximage.cfg       |    2 +-
 board/warp/imximage.cfg                     |    2 +-
 board/warp7/imximage.cfg                    |    2 +-
 common/Kconfig                              |    5 +
 configs/imx6qdl_icore_defconfig             |   32 +
 drivers/serial/Kconfig                      |    7 +
 drivers/thermal/Kconfig                     |   13 +
 include/configs/imx6qdl_icore.h             |  131 +++
 include/dt-bindings/clock/imx6qdl-clock.h   |  274 ++++++
 37 files changed, 5195 insertions(+), 16 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-icore.dts
 create mode 100644 arch/arm/dts/imx6dl-pinfunc.h
 create mode 100644 arch/arm/dts/imx6dl.dtsi
 create mode 100644 arch/arm/dts/imx6q-icore.dts
 create mode 100644 arch/arm/dts/imx6q-pinfunc.h
 create mode 100644 arch/arm/dts/imx6q.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-icore.dtsi
 create mode 100644 arch/arm/dts/imx6qdl.dtsi
 create mode 100644 board/engicam/icorem6/Kconfig
 create mode 100644 board/engicam/icorem6/MAINTAINERS
 create mode 100644 board/engicam/icorem6/Makefile
 create mode 100644 board/engicam/icorem6/README
 create mode 100644 board/engicam/icorem6/icorem6.c
 create mode 100644 configs/imx6qdl_icore_defconfig
 create mode 100644 include/configs/imx6qdl_icore.h
 create mode 100644 include/dt-bindings/clock/imx6qdl-clock.h

-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to