> -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Simon Glass > Sent: 2016年9月23日 12:17 > To: Wenyou Yang - A41535 <[email protected]> > Cc: U-Boot Mailing List <[email protected]>; Stephen Warren > <[email protected]>; Andreas Bießmann <[email protected]>; Wenyou > Yang - A41535 <[email protected]> > Subject: Re: [PATCH v1] ARM: dts: Makefile: Use board to decide to compile dts > > Hi, > > On 18 September 2016 at 01:40, Wenyou Yang <[email protected]> wrote: > > To avoid to compile all AT91 SoCs' board dts files, use the board to > > decide to build its corresponding dts, instead of CONFIG_AT91FAMILY. > > > > Signed-off-by: Wenyou Yang <[email protected]> > > --- > > > > arch/arm/dts/Makefile | 8 ++++---- > > 1 file changed, 4 insertions(+), 4 deletions(-) > > What is the purpose of this? It seems unnecessary to me. Compiling a few > more .dts files will be quick.
Why we need to compile all AT91FAMILY dts files, not be used for a specific AT91 board? It is enough to compile the dts file used for the target board. Others is unnecessary. > > > > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index > > 223124e..2ac1f20 100644 > > --- a/arch/arm/dts/Makefile > > +++ b/arch/arm/dts/Makefile > > @@ -2,10 +2,10 @@ > > # SPDX-License-Identifier: GPL-2.0+ > > # > > > > -dtb-$(CONFIG_AT91FAMILY) += at91sam9260-smartweb.dtb \ > > - at91sam9g20-taurus.dtb \ > > - at91sam9g45-corvus.dtb \ > > - at91sam9g45-gurnard.dtb > > +dtb-$(CONFIG_TARGET_SMARTWEB) += at91sam9260-smartweb.dtb > > +dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb > > +dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb > > +dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb > > > > dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb > > dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb > > -- > > 2.7.4 > > > > Regards, > Simon Best Regards, Wenyou Yang _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
