Move SYS_OS_BASE to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <h...@denx.de>
---

 common/spl/Kconfig                   | 10 ++++++++++
 configs/a3m071_defconfig             |  1 +
 configs/microblaze-generic_defconfig |  1 +
 include/configs/a3m071.h             |  1 -
 include/configs/microblaze-generic.h |  2 --
 5 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 5e2890e..36544cc 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -367,6 +367,16 @@ config SPL_OS_BOOT
          Enable booting directly to an OS from SPL.
          for more info read doc/README.falcon
 
+if SPL_OS_BOOT
+config SYS_OS_BASE
+       hex "addr, where OS is found"
+       depends on SPL && SPL_NOR_SUPPORT
+       help
+         Specify the address, where the OS image is found, which
+         gets booted.
+
+endif # SPL_OS_BOOT
+
 config SPL_POST_MEM_SUPPORT
        bool "Support POST drivers"
        depends on SPL
diff --git a/configs/a3m071_defconfig b/configs/a3m071_defconfig
index 5356489..ae696b5 100644
--- a/configs/a3m071_defconfig
+++ b/configs/a3m071_defconfig
@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_SPL=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_OS_BASE=0xfc200000
 CONFIG_HUSH_PARSER=y
 CONFIG_LOOPW=y
 # CONFIG_CMD_SETEXPR is not set
diff --git a/configs/microblaze-generic_defconfig 
b/configs/microblaze-generic_defconfig
index bc97f60..3dbf48a 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_OS_BASE=0x2c060000
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot-mONStR> "
 CONFIG_CMD_ASKENV=y
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 8514b0e..c437c4a 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -331,7 +331,6 @@
 
 #undef CONFIG_BOOTARGS
 
-#define CONFIG_SYS_OS_BASE     0xfc200000
 #define CONFIG_SYS_FDT_BASE    0xfc1e0000
 #define CONFIG_SYS_FDT_SIZE    (16<<10)
 
diff --git a/include/configs/microblaze-generic.h 
b/include/configs/microblaze-generic.h
index 32b0c62..2a7006f 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -293,8 +293,6 @@
 
 /* for booting directly linux */
 
-#define CONFIG_SYS_OS_BASE             (CONFIG_SYS_FLASH_BASE + \
-                                        0x60000)
 #define CONFIG_SYS_FDT_BASE            (CONFIG_SYS_FLASH_BASE + \
                                         0x40000)
 #define CONFIG_SYS_FDT_SIZE            (16<<10)
-- 
2.5.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to