On 05/10/2016 20:00, Fabio Estevam wrote: > Add a README file to explain how to build and flash the SD card > for Udoo boards. > > Signed-off-by: Fabio Estevam <fabio.este...@nxp.com> > --- > board/udoo/README | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 board/udoo/README > > diff --git a/board/udoo/README b/board/udoo/README > new file mode 100644 > index 0000000..6fbcc59 > --- /dev/null > +++ b/board/udoo/README > @@ -0,0 +1,21 @@ > +How to use U-Boot on MX6Q/DL Udoo boards > +---------------------------------------- > + > +- Build U-Boot for MX6Q/DL Udoo boards: > + > +$ make mrproper > +$ make udoo_defconfig > +$ make > + > +This will generate the SPL image called SPL and the u-boot.img. > + > +- Flash the SPL image into the SD card: > + > +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync > + > +- Flash the u-boot.img image into the SD card: > + > +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync > + > +- Insert the SD card in the board, power it up and U-Boot messages should > +come up. >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot