Hi Bin, Hi Simon,
I'm currently trying to only update the u-boot.bin part in the
SPI NOR chip instead of updating the complete ROM (8MiB).
Updating u-boot.bin (same as u-boot-dtb.bin) at 0x70.0000 results
in a non booting board though. I've checked a bit and found
that the U-Boot image in u-boot.rom at this offset differs
from the original u-boot.bin file. Here a diff:
uboot.test (u-boot.rom at offset 0x70.0000)
0000 2D50: 54 2D F0 FF 50 4C F7 FF 00 98 01 00 00 00 F0 FF T-..PL..
........
u-boot.bin
0000 2D50: 54 2D F0 FF 00 00 00 00 00 00 00 00 00 00 F0 FF
T-...... ........
Do you know why this is the case? I would have expected no differ
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
