On Sun, Oct 09, 2016 at 07:45:41AM +0200, Eric Nelson wrote: >Hi Peng, > >Note the typo in the subject header.
Thanks. > >On 10/08/2016 08:58 AM, Peng Fan wrote: >> Introduce USE_IMXIMG_PLUGIN Kconfig >> >> Signed-off-by: Peng Fan <[email protected]> >> Cc: Stefano Babic <[email protected]> >> Reviewed-by: Tom Rini <[email protected]> >> --- >> >> V3: >> None >> >> V2: >> New >> >> arch/arm/imx-common/Kconfig | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/arch/arm/imx-common/Kconfig b/arch/arm/imx-common/Kconfig >> index 1b7da5a..85eac57 100644 >> --- a/arch/arm/imx-common/Kconfig >> +++ b/arch/arm/imx-common/Kconfig >> @@ -17,3 +17,10 @@ config IMX_BOOTAUX >> depends on ARCH_MX7 || ARCH_MX6 >> help >> bootaux [addr] to boot auxiliary core. >> + >> +config USE_IMXIMG_PLUGIN >> + bool "Using imximage plugin code" > >s/Using/Use/ Will fix this in V4. > >> + depends on ARCH_MX7 || ARCH_MX6 >> + help >> + i.MX6/7 supports DCD and Plugin. Enable this configuration >> + to use Plugin, otherwise DCD will be used. >> > >MX5x also supports plugins, right? Yeah. I do not have the hardware to test, so not add ARCH_MX5. If later, someone can test ARCH_MX5, then he/she could add the support. > >Also, the alternative isn't really DCD is it? Most (all) of the boards >using SPL now are using the essentially empty config file >in arch/arm/imx-common/spl_sd.cfg. The help msg is just to tell use plugin or DCD. spl_sd.cfg surely can have DCD DATA lines or not :) Regards, Peng. > > >_______________________________________________ >U-Boot mailing list >[email protected] >http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
