Hi Masahiro, On 4 October 2016 at 22:08, Masahiro Yamada <yamada.masah...@socionext.com> wrote: > Hi Simon, > > > 2016-10-05 9:25 GMT+09:00 Simon Glass <s...@chromium.org>: > >> + >> +Image description format >> +------------------------ >> + >> +The binman node is called 'binman'. An example image description is shown >> +below: >> + >> + binman { >> + filename = "u-boot-sunxi-with-spl.bin"; >> + pad-byte = <0xff>; >> + blob { >> + filename = "spl/sunxi-spl.bin"; >> + }; >> + u-boot { >> + pos = <CONFIG_SPL_PAD_TO>; >> + }; >> + }; > > > Oh my, finally CONFIG_ in device tree. > > If CONFIG_SPL_OF_CONTROL is enabled, SPL can parse "/binman/u-boot/pos" > property > to know which offset address SPL should load U-Boot proper from, > then remove CONFIG_SPL_PAD_TO. > Otherwise, I have no idea to avoid this.
Yes we can do that. but in any case we need this CONFIG in the DT. I think this CONFIG (or one depending on it) is also used in the build to provide the link address for U-Boot. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot